When You Are Done - Cisco PIX 520 - PIX Firewall 520 User Manual
User manual
Hide thumbs
Also See for PIX 520 - PIX Firewall 520:
- Installation manual (58 pages) ,
- User manual (24 pages) ,
- Online help manual (256 pages)
Table of Contents
When You Are Done
Step 1
Either:
•
Use a twisted four-pair, Category 5 cable
to connect the switch 10/100/1000 port to
another device
Use a twisted four-pair, Category 5 cable
•
to connect the switch 1000BASE-T SFP
module port to another device
Use a fiber-optic cable with an LC or
•
MT-RJ connector to connect a fiber-optic
SFP module port to another device.
Only one port can be active at a time. If both
ports are connected, the SFP module port has
priority. The priority setting is not
configurable.
Step 2
Insert the other cable end in the other device.
Step 3
Wait until the port LEDs on the switch and the attached device are solid green. The solid
green port LEDs means a successful connection between the two devices.
Troubleshooting:
If the port LEDs are not solid green or if either port LED turns amber, make sure that:
You are using an undamaged Category 5 Ethernet cable or an undamaged fiber-optic
•
cable.
The other device is turned on.
•
When You Are Done
User Guide for the Catalyst Express 520 Switches
4-8
Follow these steps:
After you have connected the switch to the other devices in your network, you can
manage your switch as described in
Settings," Chapter 6, "Monitoring the Switch,"
the Switch."
Chapter 4
C at al ys
t Ex pr es
s 52 0
Se rie s
1
Chapter 5, "Changing the Switch Network
and
Chapter 7, "Troubleshooting
Connecting to the Switch
OL-12761-02
Hide quick links:
Table of Contents
