Electronic Locking System Test
With the door still open, you can test the Electronic Digital Lock
by manually activating the Locking System.
To activate the Locking System, locate the Locking Push Button
on the inside of the safe door, push it in and turn the handle
downward to the left. This will cause the Live Bolts to extend
out and into the "locked" position. Now with the door open
and the Live Bolts in the locked position, you may proceed to
Testing the Passcode.
Important: ENGAGING LIVE BOLTS
Closing the safe door with the Live Bolts in the locked (extended) position can
damage the safe. The Locking Push Button should only be used when testing
or programming the safe with the door remaining open.
Home and Office Security Safes
Test Locking System
ExTENDED
LIVE BOLTS
LOCKING PUSH
BUTTON
3