Table of Contents
Displaying IP Source Guard Information
The output shows the five valid IP-MAC bindings that have been learned on the interface
GigabitEthernet 1/0/3. For the private VLAN cases, the bindings are associated with primary VLAN ID.
So, in this example, the primary VLAN ID, 200, is shown in the table.
Switch# show ip verify source
Interface
---------
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
Gi1/0/3
The output shows that the five valid IP-MAC bindings are on both the primary and secondary VLAN.
Displaying IP Source Guard Information
To display the IP source guard information, use one or more of the privileged EXEC commands in
Table
Table 22-3
Commands for Displaying IP Source Guard Information
Command
show ip source binding
show ip verify source
Understanding DHCP Server Port-Based Address Allocation
DHCP server port-based address allocation is a feature that enables DHCP to maintain the same IP
address on an Ethernet switch port regardless of the attached device client identifier or client hardware
address.
When Ethernet switches are deployed in the network, they offer connectivity to the directly connected
devices. In some environments, such as on a factory floor, if a device fails, the replacement device must
be working immediately in the existing network. With the current DHCP implementation, there is no
guarantee that DHCP would offer the same IP address to the replacement device. Control, monitoring,
and other software expect a stable IP address associated with each device. If a device is replaced, the
address assignment should remain stable even though the DHCP client has changed.
When configured, the DHCP server port-based address allocation feature ensures that the same IP
address is always offered to the same connected port even as the client identifier or client hardware
address changes in the DHCP messages received on that port. The DHCP protocol recognizes DHCP
clients by the client identifier option in the DHCP packet. Clients that do not include the client identifier
option are identified by the client hardware address. When you configure this feature, the port name of
the interface overrides the client identifier or hardware address and the actual point of connection, the
switch port, becomes the client identifier.
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Software Configuration Guide
22-26
Filter-type
Filter-mode
-----------
-----------
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
ip trk
active
22-3:
Purpose
Display the IP source bindings on a switch.
Display the IP source guard configuration on the switch.
Chapter 22
Configuring DHCP Features and IP Source Guard
IP-address
Mac-address
---------------
-----------------
40.1.1.23
40.1.1.24
40.1.1.20
40.1.1.21
40.1.1.22
40.1.1.23
40.1.1.24
40.1.1.20
40.1.1.21
40.1.1.22
Vlan
----
200
200
200
200
200
201
201
201
201
201
OL-13270-06
Hide quick links:
Chapters
Table of Contents
Troubleshooting
