Step 1: Specify Address Template; Create Address Template - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual
Jetdirect print servers
Hide thumbs
Also See for 630n - JetDirect Gigabit EN Print Server:
- White paper (20 pages) ,
- Appendix (13 pages)
Table of Contents
Table 5-2
Limitations to rules, templates and services (continued)
Item
:: to FE7F:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF for remote addresses
◦
FE81:: to FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF for both local and remote
addresses
●
All Broadcast/Multicast Addresses Results in four (4) address template rules:
◦
224.0.0.0 to 239.255.255.255 IPv4 local addresses and all IPv4 remote addresses
◦
A single IPv4 local address, and all IPv4 remote addresses
◦
255.255.255.255 local address, and all IPv4 remote addresses
◦
FF00:: / 8 local IPv6 addresses, and all IPv6 remote addresses
NOTE:
To avoid multiple rules for these predefined address templates, you can create custom address
templates.
Maximum number of user-defined address templates.
Maximum number of services you can add to a user-defined service template.
NOTE:
The predefined All Services template is not subject to this limitation and includes all services
supported by the print server.
Maximum number of services you can add to the policy.
For example, if a user-defined service template consists of 64 services, then it is the only service
template you can use.
Maximum number of service templates in the policy.
Maximum number of user-defined custom service templates.
Maximum number of IPsec templates in the IPsec policy.
Maximum number of user-defined custom IPsec templates.
Step 1: Specify Address Template
When you select Add Rules, the available address templates are listed in the Address Templates field
by name. Select a predefined template, or click New to create a custom template using the Create
Address Template page, described below.
To view or delete a template in the list, select it and click View or Delete (you cannot delete some
predefined templates).
After selecting an address template, click Next.
Create Address Template
Items on the Create Address Template page are described in the following table:
Table 5-3
Create Address Template page
Item
Address Template Name
102 Chapter 5 IPsec/Firewall configuration (V.38.xx)
Description
Name of the custom address template. The name is added to the Specify Address
Template page.
NOTE:
The address template name must be unique.
Limit
8
64
64
10
10
5
5
ENWW
Hide quick links:
Table of Contents
Troubleshooting
