Set Host Channel - Dell PowerVault MD3260 Cli Manual
Powervault modular disk storage arrays
Hide thumbs
Also See for PowerVault MD3260:
- Owner's manual (58 pages) ,
- Deployment manual (26 pages) ,
- Configuration manual (17 pages)
Table of Contents
Parameter
host
hostGroup
userLabel
hostType
Host Group Parameter
hostGroupName
none
defaultGroup
NOTE: When you use this command, you can specify one or more of the optional parameters. You do not, however,
need to use all of the parameters.
NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names.
Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace
square brackets ([ ]) with angle brackets (< >) to overcome this limitation.
Set Host Channel
This command defines the loop ID for the host channel.
Syntax
set hostChannel [hostChannelNumber]
preferredID=portID
Parameters
170
Description
The name of the host that you want to assign to a host
group. Enclose the host name in square brackets ([ ]). If
the host name has special characters, you must also
enclose the host name in double quotation marks (" ").
The host group to which you want to assign the host. (The
following table defines how the command runs if the host
does or does not have individual virtual disk-to-LUN
mappings.) Enclose the host group name in double
quotation marks (" "). The defaultGroup is the host group
that contains the host to which the virtual disk is mapped.
The new host name. Enclose the host name in double
quotation marks (" ").
The index label or number of the host type for the HBA
host port. Use the show storageArray
hostTypeTable command to generate a list of
available host type identifiers. If the host type has special
characters, enclose it in double quotation marks (" ").
Host Has Individual Virtual Disk-to-
LUN Mappings
The host is removed from the present
host group and is placed under the
new host group defined by
hostGroupName .
The host is removed from the host
group as an independent partition and
is placed under the root node.
The command fails.
Host Does Not Have Individual Virtual
Disk-to-LUN Mappings
The host is removed from the present
host group and is placed under the
new host group defined by
hostGroupName .
The host is removed from the present
host group and is placed under the
default group.
The host is removed from the present
host group and is placed under the
default group.
- Quick Links:
- How to Use the Command Line...
- Cli Commands
Hide quick links:
Table of Contents
