Set Job-Parameters - HP 2000fc Cli Reference Manual
Modular smart array
Hide thumbs
Also See for 2000fc:
- Reference manual (330 pages) ,
- User manual (150 pages) ,
- Specification sheet (26 pages)
Table of Contents
set job-parameters
Description
Sets parameters for background scrub, partner firmware upgrade, and other jobs.
Input
set job-parameters [background-scrub enabled|on|disabled|off]
[partner-firmware-upgrade enabled|on|disabled|off] [utility-
priority low|medium|high]
Parameter
background-scrub
enabled|on|disabled|off
partner-firmware-upgrade
enabled|on|disabled|off
utility-priority
low|medium|high
Example
Enable background scrubbing of virtual disks and disable partner firmware upgrade.
# set job-parameters background-scrub on partner-firmware-upgrade
off
Info: Set Job-Parameters Background-Scrub on.
Info: Set Job-Parameters Partner-Firmware-Upgrade off.
Success: Command completed successfully
Related Commands
"show job-parameters" on page 198
■
Description
Optional. Controls whether vdisks are checked
for disk drive defects to ensure system health.
Optional. Controls whether versions of
firmware components are monitored and
automatically updated on the partner controller.
Optional. Sets the priority at which jobs run
with respect to I/O operations competing for the
system's processors. This affects virtual disk
verification and reconstruction, but not
background scrub.
Chapter 3 Command Descriptions
137
Table of Contents
