Table of Contents
Upgrading Your GSS Devices
14.
15.
16.
Cisco Global Site Selector Administration Guide
A-8
Verify that the GSS device reaches a normal operation state of runmode 4 or
5 by entering the gss status command.
Enter configuration mode and enable CNR if the GSS has CNR loaded on it.
gssm1.example.com# config
gssm1.example.com (config)# cnr enable
Repeat the entire procedure for the remaining GSS devices in your network.
Appendix A
Upgrading the GSS Software
OL-10410-01
Hide quick links:
Table of Contents
