Igmp Static Multicast Router Configuration - HP GbE2c - Blc Layer 2/3 Fiber SFP Option Cli Reference Manual
Hp gbe2c ethernet blade switch for c-class bladesystem iscli reference guide
Hide thumbs
Also See for GbE2c - Blc Layer 2/3 Fiber SFP Option:
- Interface manual (209 pages) ,
- Command reference manual (175 pages) ,
- Application manual (165 pages)
Table of Contents
Table 138
IGMP Snooping commands
Command
ip igmp snoop vlan <1-4095>
no ip igmp snoop vlan <1-4095>
no ip igmp snoop vlan all
[no] ip igmp snoop vlan <1-4095>
fastleave
ip igmp snoop enable
no ip igmp snoop enable
show ip igmp snoop
IGMP static multicast router configuration
The following table describes the Static Multicast Router Configuration commands.
NOTE:
When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
Table 139
IGMP Static Multicast Router commands
Command
ip igmp mrouter
<1-4095> <1-2>
NOTE:
Port number must be an external port (19-24).
no ip igmp mrouter
<1-4095> <1-2>
show ip igmp mrouter
Description
Adds the VLAN to IGMP Snooping.
Command mode: Global configuration
Removes the VLAN from IGMP Snooping.
Command mode: Global configuration
Removes all VLANs from IGMP Snooping.
Command mode: Global configuration
Enables or disables FastLeave processing. FastLeave allows the
switch to immediately remove a port from the IGMP port list, if the
host sends a Leave message, and the proper conditions are met.
This command is disabled by default.
Command mode: Global configuration
Enables IGMP Snooping.
Command mode: Global configuration
Disables IGMP Snooping.
Command mode: Global configuration
Displays the current IGMP Snooping parameters.
Command mode: All except User EXEC
Description
Selects a port/VLAN combination on which the static multicast router is
connected, and configures the IGMP version (1 or 2) of the multicast
router.
Command mode: Global configuration
Removes a static multicast router from the selected port/VLAN
combination.
Command mode: Global configuration
Displays the current IGMP Static Multicast Router parameters.
Command mode: All except User EXEC
Configuration Commands 123
Table of Contents
