Extending Using Diskpart - HP 345646-001 - StorageWorks NAS 2000s External Storage Server Administration Manual
Nas 2000s administration guide
Hide thumbs
Also See for 345646-001 - StorageWorks NAS 2000s External Storage Server:
- Installation manual (38 pages) ,
- Application note (7 pages)
Table of Contents
Figure 35: Extending a volume
Extending a Volume on Dynamic Disks
The WebUI allows for the extension of volumes based on a dynamic disk or a set of dynamic
disks. To extend a volume perform the following steps:
1. Click the Disks tab.
2. Click the Volumes tab.
3. Click Manage.
4. Select the volume to extend and select Extend. A remote session to Disk Manager is
5. To extend a given volume, right-click on the desired volume and select Extend.
6. Enter the amount to extend the volume. If no more space is available on the current
Extending using DiskPart
DiskPart may also be used to extend a partition or volume from the CMD prompt of the NAS
operating system via Remote Desktop. Complete help is available from the Windows 2003
desktop under Start > Help and Support. To use DiskPart follow the steps below:
Connect to the box through remote desktop, login, and select the command prompt icon.
1. Type Diskpart.
2. From the Diskpart prompt type the following commands:
NAS 2000s Administration Guide
started.
dynamic disk, add an additional dynamic disk to the list of available disks and utilize
space from it.
Type list to display all of the volumes
Type select [name of volume] (for example select Volume 4) to work
against a particular volume or partition.
Disk Management
71
Table of Contents
