HP 245161-B22 - 10642 42U Rack Shock Pallet Installation Instructions
110v/220v light rack option kit
Hide thumbs
Also See for 245161-B22 - 10642 42U Rack Shock Pallet:
- Reference manual (75 pages) ,
- Best practices manual (48 pages) ,
- Read this first (4 pages)
Quick Links
See also:
Reference Manual, Read This First
HP 1 10V/220V Light Rack
Option Kit
Installation Instructions
© Copyright 2004, 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 365456-002
August 2007 (Second Edition)
About this device
The HP 110V/220V Light Rack Option Kit enables you to add a
light to the rack.
Kit Contents
The items required for installation include:
110V/220V light unit (with cover)
F14W/133-T8 fluorescent lamp
Power cord (10 ft), C13-C14
Screws
Required Tool
You will need a flat-head screwdriver.
Important Safety Information
Before installing this product, read the Important
Safety Information guide provided.
WARNING: To reduce the risk of personal injury, fire, or
damage to the equipment, do not overload the HP
110V/220V Light Rack Option Kit.
WARNING: The fluorescent lamp contains mercury.
Therefore, at end-of-life, the fluorescent lamp may require
special handling.
WARNING: To reduce the risk of personal injury or
damage to the equipment, be sure that:
The leveling feet are extended to the floor.
The full weight of the rack rests on the leveling feet.
The stabilizing feet are attached to the rack if it is a
single-rack installation.
The racks are coupled together in multiple-rack
installations.
Only one component is extended at a time. A rack
may become unstable if more than one component is
extended for any reason.
Related Manuals for HP 245161-B22 - 10642 42U Rack Shock Pallet
Summary of Contents for HP 245161-B22 - 10642 42U Rack Shock Pallet
-
Page 1: Kit Contents
About this device HP 1 10V/220V Light Rack The HP 110V/220V Light Rack Option Kit enables you to add a Option Kit light to the rack. Installation Instructions Kit Contents The items required for installation include: 110V/220V light unit (with cover) F14W/133-T8 fluorescent lamp Power cord (10 ft), C13-C14 Screws... - Page 2 Installing the HP 1 10V/220V Replace the fluorescent lamp cover. Light Rack Option Kit Remove the fluorescent lamp cover. Operating the HP 1 10V/220V Light Rack Option Kit Insert two screws, securing the HP 110V/220V Light Rack Option Kit to the rack frame. Item Description Status...
- Page 3 Connecting the Power Cord to HP 1 10V/220V Light Rack Option the HP 1 10V/220V Light Rack Kit Specifications Option Kit Parameter Value Height 116 mm Depth 50 mm Width 452 mm Weight approx. 1 kg Rated input 100–240 V, 50/60 Hz Maximum rated output 10 A/250 VAC Illuminant...
- Page 4 F14W/133-T8 Fluorescent Operating Value Conditions* Lamp Specifications Electrical Nominal Value Min. Max. series 507/220, 540/230, 580/240 Data* operation Starter Frequency 50 Hz single FS-11, FS-22, COP-22 operation Lamp 14 W series FS-22, COP-22 nominal operation wattage Burning Lamp position rated wattage * Starter and Ballast must comply with IEC/EN 60155 and IEC/EN single...