Sanyo CE42LM4N-NA - CE - 42" LCD Flat Panel Display Specifications
42v robust networkable lcd monitor
Hide thumbs
Also See for CE42LM4N-NA - CE - 42" LCD Flat Panel Display:
- Instruction manual (37 pages) ,
- Specifications (19 pages) ,
- Installation and operation manual (52 pages)
Quick Links
See also:
Instruction Manual, Specification
4 2 V R O B U S T N E T W O R K A B L E L C D M O N I T O R
CE42LM4N-NA
Robust LCD Monitor
ROBUST LCD MONITOR
SANYO has used all of its expertise in creating a
lightweight aluminum framed LCD monitor which is
protected by non-glare acrylic panel. This means that
the SANYO robust monitor can be used in a wide
variety of environments for dusty and oily circumstance
such as fast food, digital signage, industrial and public
display
EXTENSIVE INPUT & OUTPUT TERMINALS
The 42LM4N has various input and output terminals
including component (Y,Pb,Pr) or RGBHV input and
output with 5-BNC, composite video input and output
with BNC, and RS-232 control port (serial D-Sub 9)
input and output which offer the daisy chain connection.
There are computer inputs (a D-Sub 15 RGB terminal)
and HDMI input with HDCP for High definition signals.
There are also jacks for an external audio amp and
speakers system (RCA).
NON GLARE ACRYLIC PANEL
The 42LM4N has a non glare acrylic panel. This offers
the protection for the panel surface in the public display
applications and easy to clean the panel.
ALUMINUM CABINET & NON HOLES DESIGN
The 42LM4N uses Anodized aluminum and it has quite
unique 'Non-Holes' ventilation design which protects
against mischief in the public display applications and
less maintenance when used in a dusty or oily
environment.
OPTIONAL PJ-NET ORGANIZER
An optional network box (POA-LN01) makes it possible
to use the 42LM4WPN as a network monitor, using your
internet browser to monitor and control the display's
properties. Additional software is not required.
Issued 06/08
S p e c i f i c a t i o n s
Type
Screen Size
Aspect Ratio
Resolution
Brightness
Contrast Ratio
Viewing Angle
Panel tilt angle
Response Time
Computer Compatibility
Audio Amp
Speaker
Input Terminals
AV1
AV2
AV3
Computer 1
HDMI
RS-232
Output Terminals
AV2
AV3
Audio Monitor
RS-232
Power Supply
Power Consumption
Operation Temperature
Operation Altitude
Dimensions (WxHxD)
Net Weight
Included Accessories
Optional Accessories
Safety
FCC Rating
Caution:
Due to product design considerations,
please consult with a qualified
installation engineer prior to monitor
ceiling mounting. Ceiling mounting
must be such so the ambient
temperature does not exceed 104°F
and that the proper side-supporting
bracket, specifically designed for
ceilings, is used.
Because its products are subject to continuous improvement, SANYO reserves the right to modify
product design and specifications without notice and without incurring any obligations. It is not
recommended to install the screen in direct sunlight without adequate shading. Using in direct
sunlight may cause a black shadow to appear on the screen and will disappear when panel
temperature goes down.
Rear Input Panel
Liquid Crystal Display Panel
42V (Landscape / Portrait use available)
Portrait is turning clockwise in 90 degree)
16:9
WXGA 1366 (H) x 768 (V)
500 (cd/m 2 for panel)
800:1 (typical)
178° (Vertical/Horizontal)
90 degree tilt available (panel downward)
8ms (gray to gray)
VGA, SVGA, XGA, SXGA, WXGA, UXGA
N/A
N/A
Video / Audio (Scart)
Component (Y,Pb,Pr) / RGBHV (BNC x 5)
Audio (RCA x 2)
Video (BNC x1)
RGB (D-Sub 15)
HDMI v1.1 w/HDCP
Serial (D-Sub 9)
Component (Y,Pr,Pb) / RGBHV (BNC x 5)
Audio (RCA x 2)
Video (BNC x1)
Audio (RCA x 2)
Serial (D-Sub 9)
AC 100-240V 50-60Hz
225W
32 – 115 °F
Up to 13, 124ft (4,000m)
41.3" x 25.7" x 5.9" (w/o Option)
78 lbs. (w/o Option)
Owner's Manual; Remote Control w/Batteries;
AC Power Cord
PJ-Net Organizer (POA-LN01)
UL60950 2003
CAN/CSA-C22.2
Class B, UL Listed
Optional PJ-Net Organizer
(POA-LN01)
© 2008 SANYO
