Perc 3/Dcl - Dell PowerEdge 1550 Self-Study Manual
Dell server self study guide
Hide thumbs
Also See for PowerEdge 1550:
- User manual (34 pages) ,
- Installation manual (24 pages) ,
- Information update (12 pages)
Table of Contents
DCSE: PowerEdge 1550 Self-Study
Page 66
Voltage Differential) SCSI connectors internal to the system. Channel A
can be used (in non-RAID systems) to connect to SCSI hard disk drives.
The SCSI B channel will be used to connect a SCSI tape backup unit. No
SCSI channels from this chip are externally accessible.
This chip is connected to the 66-MHz, 64-bit PCI bus. This will prevent
the slower 33-MHz, 32-bit PCI bus from slowing it down.
PERC 3/DCL
During the POST sequence when the system loads add in BIOS' the PERC
3/DCL presents users with the following:
Copyright© DELL COMPUTER CORPORATION
Press to Run Configuration Utility
Or press for WebBIOS
Configuration Utility
The configuration utility accessed through is the same as
previous AMI based PERCs (PERC II, PERC 2/DC, and PERC 2/SC).
WebBIOS
The WebBIOS accessed through is a newer interface. It is
not actually a web accessible BIOS interface. It runs locally. It is a GUI
interface with mouse support.
There is a toolbar the top of every screen. The icons, from left to right,
are:
Icon
Function
Go to Home Page; click this icon to return to the main
screen.
Go to Previous Page; click this icon to return to the page
you accessed immediately before the current page.
Exit RAID Configuration Utility; click on this icon to exit
the WebBIOS program.
Adapter selection; click on this icon to scan for controllers
connected to your system.
Scan for Adapters; click this icon to scan the system for any
adapters installed into the system. Devices attached to the
adapters will also be scanned.
Version 0.3, 4 December, 2000
Dell
- Quick Links:
- Description
- Poweredge 1550 Overview
- Features
- Cpu
- Integrated Scsi
- Chassis
Hide quick links:
Table of Contents
