Quick Links
LP Conversion
Instructions
Questions? Call 800.GE.CARES (800.432.2737)
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
local inspector's use.
IMPORTANT –
•
and ordinances.
Note to Installer –
•
with the Consumer.
Note to Consumer –
•
for future reference.
FOR YOUR SAFETY
WARNING –
all adjustments described in the following steps must be
made before attempting burner adjustments or use of the
cooktop.
WARNING –
installed by a qualified service agency in accordance with
the manufacturer's instructions and all applicable codes
and requirements of the authority having jurisdiction.
If the information in these instructions is not followed
exactly, a fire, explosion or production of carbon
monoxide may result, causing property damage, personal
injury or loss of life. The qualified service agency is
responsible for the proper installation of this kit. The
installation is not proper and complete until the operation
of the converted appliance is checked as specified in the
manufacturer's instructions supplied with the kit.
49-80298
4226-0018-00
01-05 JR
Printed in Korea
Save these instructions for
Observe all governing codes
Be sure to leave these instructions
Keep these instructions
If you are using LP (bottled) gas,
This conversion kit shall be
Gas Cooktop
JGP985
www.GEAppliances.com
or
Visit our Website at:
• This cooktop is factory set for natural gas operation.
Conversion to LP operation should be performed by a
qualified technician or installer. Keep these instructions
for future reference. When converting to LP, save the
original parts for possible future use.
• Product failure due to improper installation is not covered
under the GE Appliance Warranty.
TOOLS YOU WILL NEED
Small, thin-blade flat screwdriver with approximately 1/8"
blade width is needed to access the calibration screw.
PARTS INCLUDED
PART
Brass orifices
Stick-on conversion label
1
Adjustable wrench
QUANTITY
4
1
Related Manuals for GE JGP985BEJBB
Summary of Contents for GE JGP985BEJBB
-
Page 1: Lp Conversion Instructions
LP Conversion Gas Cooktop Instructions JGP985 Questions? Call 800.GE.CARES (800.432.2737) www.GEAppliances.com Visit our Website at: BEFORE YOU BEGIN • This cooktop is factory set for natural gas operation. Read these instructions completely and carefully. Conversion to LP operation should be performed by a IMPORTANT –... -
Page 2: Gas Supply
LP Conversion Instructions GAS SUPPLY CONVERT THE PRESSURE REGULATOR • With the installation of this conversion kit, the cooktop should operate on LP gas at 10″ of water column Locate the pressure regulator under the front of pressure. the cooktop. •... - Page 3 LP Conversion Instructions CONVERT SURFACE BURNERS ADJUST GRILL BURNER AIR SHUTTER Insert screwdriver blade in slot and twist with slight Air shutter pressure to allow air shutter to slide easily The air shutters for the grill burner may need to be adjusted to get better flame appearance and ignition.
- Page 4 LP Conversion Instructions ADJUST THE LOW FLAME ADJUST THE LOW FLAME (SIMMER) SETTING (SIMMER) SETTING (cont.) The top burner valves have low flame/simmer Flame Recheck: adjustment screws accessible through the valve Repeat the adjustment for each burner. After the switches. A flashlight may be needed to locate the adjustment is made, turn all burners off.