ZyXEL Communications IES-5000 Specifications

IES-5000

6.5U IP DSLAM with DC Power

Non-blocking Gigabit Backplane

IEEE 802.1p Priority Queuing,

Packet Classification and Queue

Scheduling (SP, WRR)

VLAN Bridging, VLAN Trucking, and

VLAN Stacking

IGMP v1, v2 Snooping and Proxy

256 Multicast Groups

Anti IP/MAC Address Spoofing

Rule-based Packet Filtering

Failover Network Termination

Single/Dual End Loop Test

ATM Forum TM 4.0

6.5U/4U IP DSLAM with

DC Power

ies-5000

ies-5005

IES-5005

4U IP DSLAM with DC Power

Removing the obstacles of Service Provisioning

ZyXEL' L L s Next Generation Multi-Service

' '

IP Access Solution

Benefits

Service Aware

As a flagship product line of ZyXEL IPDSLAM, the IES-5000/5005 Series is equipped with non-blocking

gigabit backplane, failover-enabled Management Switch Cards (MSC), dual power modules and high-port

density DSL line cards. With embedded IP-centric QoS, security and multicasting firmware features, the IES-

5000/5005 is a chassis-based system that facilitates Telco/ISP delivering high degree of quality of

experience to today's demanding residential and business customers, and achieving its infrastructure

provisioning criteria of reliability, flexibility and scalability at competitive CAPEX/OPEX.

Scalability

ZyXEL's IES-5000 is a 6.5RU height and 10-slot chassis-based system with separated 5RU splitter frame. Two

of the 10 slots are reserved for Management Switch Cards (MSC) and the remaining 8 slots are for DSL line

termination cards. The ADSL2/ADSL2+/G.SHDSL.bis line cards have 48 ports while the VDSL2 line card

comes with 24 ports. In a standard rack, you can install up to 7 units without a splitter chassis or up to 4

units with a splitter chassis. The MSC has 4 GE ports for uplink and subtending. With the subtending

feature, the IES-5000 can be cascaded in the rack at a central office, or be connected to remote IES products

in the form of a tree, ring, or daisy-chained as needed. The uplinks can be used as a traffic aggregation

trunk or set to work in 1+1 redundant mode. Additionally, install two Management Switch cards (MSC) for

link redundancy and failover support. In case when an MSC fails, the second MSC takes over control within

1 second.

The compact design of IES-5005 offers a 4RU-height and 5-slot chassis-based system with a separated 3RU

splitter frame. One slot is reserved for an MSC card and the remaining 4 slots are for DSL line termination

cards. The ADSL2/ADSL2+/G.SHDSL.bis line cards have 48 ports while the VDSL2 line card comes with 24

ports. In a standard rack, you can install up to 10 units without a splitter chassis or up to 6 units with a

splitter chassis. The IES-5005 supports remote terminal (RT) and uses the same MSC and line cards as the

IES-5000.

Multiple Standard DSL Services

Four hot swappable DSL line cards (ADSL2+ over POTS, ADSL2+ over ISDN, G.SHDSL, and VDSL2) are

available. The ADSL2+ over POTS and the ADSL2+ over ISDN give subscribers with asymmetric

transmission bandwidth of up to 25 Mbps/1.2 Mbps. The G.SHDSL.bis provides symmetric transmission

bandwidth of 4.096 Mbps, 8.192 Mbps or up to 16.384 Mbps (similar to a lease line). The VDSL2 offers up to

65 Mbps/35 Mbps high speed connectivity per port with various loop distances over copper wiring.