Quick Links
CFS-1059
MANUAL |
us
Mode
Canadian Model
AEP Model
Australian Model
E Model
Model Name Using Similar Machanism
NEW
Tape Transport Mechanism Type
MF-1055
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With 3.2-ohm loads, both channels driven, from 150 to 10,000 Hz; rated 1.5W per
channel minimum, RMS power, with no more than 10% total harmonic distortion in
AC operation. (US model)
Other specifications
Frequency range
Power requirements
220-230V AC, 50Hz (AEP, Italian model)
30V AC, 50Hz (Australi
del
230V A C , 50H (Australian model)
120V AC, 60Hz (US, Canadian, E model)
US, Canadian,
rare
;
Australian, E model
87.6—-108MHz
530~1,710kHz
9V DC, six size D (R 20) batteries
Power consumption
14W (Australian model)
Italian model
87.5—108MHz
526.5—-1,606.5kHz
AEP model
87.6-107MHz
531-1,602kHz
(in AC operation)
12W (US, Canadian, E model)
14W (AEP, Italian model)
Battery life
Antennas
FM: Telescope/AM: Built-in ferrite bar
=
:
Recording system
4-track, 2-channel stereo
Batteries
FM recording
Tape playback
Frequency response
100-10,000Hz
Sony SUM-1 (NS) | Approx. 16 hours | Approx. 8 hours
Speakers Woofer:
10 cm (4inches) dia, cone type/ Tweeter: 2 cm
Sony AM alkaline
Approx. 36 hours
Approx. 21 hours
(4/5 inches) dia.
;
:
;
sions
rox.
2
|
227/
Input
CD/TV LINE IN
_ Dimensions
Approx.
579 x
206 x
197 mm (w/h/d) (
8X
81/g x 77/8 inches) incl. projecting parts and
controls, not incl. handle
Mass
Approx. 4.6kg (10lb 20z) incl. batteries
Supplied accessory
AC power cord (1) (AEP, IT, AUS model)
jacks (phone jacks), sensitivity
0.3V, input impedance 47 kilohms
Output
Headphones jack (stereo minijack),
for 16-68 ohms
impedance headphones
Power output
2.3W+4+2.3W (at 3.2 ohms, 10% harmonic
~ (except for US)
distortion in DC operation) (Canadian, E,
Australian model)
Design and specifications are subject to change without notice.
Refer to the add
