Carrying power tools with your fi nger on the switch GENERAL POWER TOOL SAFETY or energising power tools that have the switch on WARNINGS invites accidents. d) Remove any adjusting key or wrench before WARNING turning the power tool on. Read all safety warnings and all instructions.
14. Please use the designated attachments which are another. listed in the operations manual and Hitachi’s catalog. Shorting the battery terminals together may cause Accidents or injuries could result from not doing so.
3. If you fi nd rust, foul odor, overheating, discolor, CAUTION ON LITHIUM-ION BATTERY deformation, and/or other irregularities when using the battery for the fi rst time, do not use and return it to your To extend the lifetime, the lithium-ion battery equips with the supplier or vendor.
Page 9
○ It may not be possible to charge some USB devices, depending on the type of device. PRECAUTIONS REGARDING THE DUST-RESISTANCE AND WATER- PROOFING FUNCTIONS This product conforms to IP56 protection class ratings (dust-resistance and water-proofi ng) for electrical equipment as stipulated by the international IEC regulations.
The specifi cations of this machine are listed in the Table on page 15. Always OFF NOTE Due to HITACHI’s continuing program of research and Clockwise rotation development, the specifi cations herein are subject to change without prior notice. Counterclockwise rotation...
Page 11
Table 1 Indications of the charge indicator lamp Lights for 0.5 seconds. Does not light for Before Blinks 0.5 seconds. (off for 0.5 seconds) Plugged into power source charging (RED) Lights for 0.5 seconds. Does not light for Blinks 1 second. (off for 1 second) Battery capacity at less than 50% (BLUE) While...
*1 Installing a socket How to make the batteries perform longer. Select the socket to be used. [WR36DA] (1) Recharge the batteries before they become completely (1) Slide the O-ring out of the groove, then align the hole exhausted. of the socket with the hole of the anvil and insert the When you feel that the power of the tool becomes anvil into the socket.
However, signifi cantly reduced battery usage time may Important notice on the batteries for the Hitachi be recovered by repeatedly charging and using the cordless power tools batteries two to fi ve times. Please always use one of our designated genuine If the battery usage time is extremely short despite batteries.
Page 14
The charger’s vents are blocked, causing its Avoid blocking the vents. internal components to overheat. The cooling fan is not running. Contact a Hitachi Authorized Service Center for repairs. The USB power lamp The battery’s capacity has become low. Replace the battery with one that has has switched off...