Table of Contents
SETTINGS
6.5
CYCLE COUNTER DATA
The number of completed cycles in a six-digit form is displayed in the setting when changing
Y
the display inscription (maximum 999,999 cycles).
The example shows the counter value 123 456 cycles:
1
Press and hold
2
After the inscription P1 appears, press
3
After the inscription P0 appears, press
4
After the inscription F0 appears, press
5
After the inscription F1 appears, press
The display will show two digits with two dots (for example, 1. 2.).
These are the rst two digits of the counter.
6
In order to see the next two digits of the counter (third and fourth)
press
The display will show the next two digits with one dot in the middle
(for example, 3. 4).
7
In order to see the last two digits of the counter ( fth and sixth)
press
The display will show the last two digits with one dot at the end
(for example, 5 6.).
8
Using
9
To exit the setting menu, press 3 times
CONTROL UNITS U TR230 868 / U TR400 868
for ~5 s, until entering the setting menu
or
it is possible to see the counter digits again
.
Table 16
5 s
×3
27
27
Table of Contents
