Table of Contents
MAINTENANCE AND STORAGE AFTER USE
■ How to maintain
1. Position the microphone cap as shown in the
figure and put it on the microphone securely
until a click is heard.
2. Close the buckle securely and wipe the case
with a cloth moistened with water or wash it
with tap water which is flowing gently, to
remove foreign matter or salt. (Do not wash
the case with water at high pressure. It could
cause water to enter.)
Use the brush (pro¬
vided) to wipe off the sand and mud from the
clearances of the case, switches, buttons,
buckle, etc.
NOTE: Remove the dirt and dust completely
from the terminal section at the bottom using
the brush (provided) or a soft cloth.
3. Wipe off the water on the case with a dry cloth.
4. Release the buckle.
Refer to "How to open and close the case" on
page 9.
5. Check that there is no water droplets on the
buckle, open the case and dry the camera/
recorder in a dark and well ventilated place.
NOTES:
•
Do not dry the camera/recorder forcibly using
a drier or heater.
•
Never use cleaning chemical such as alcohol,
thinner, benzine, etc.
•
Do not rub the lens with force. The lens could
be scratched.
•
Do not lubricate the metal sections.
■ Storage
• Store the camera/recorder in a well ventilated
place, not in a place at high temperature and
high humidity or in a dusty place.
• Store the camera/recorder without closing
the buckle and with the case slightly open.
Table of Contents
