Table of Contents
C O N F I G U R A T I O N
N EW S E N S OR T Y P E
s e l e c t :
8
N E W S E N S O R T Y P E
R EMO V E S E N S OR
< s e t > w h e n
N E W S E N S O R T Y P E
N EW S E N S OR
p l e a s e
i n s e r t
N E W S E N S O R T Y P E
L O A D N EW D A T A ?
< s e t >
t o c o n f i r m
N E W S E N S O R T Y P E
L O A D I NG D A T A !
p l e a s e w a i t
C O N F I G U R A T I O N
G A S N AME
s e l e c t :
9
G A S N A M E
A
s H 3
p l e a s e e n t e r
Satellite XT FTT Versions
Allows the user to configure the instrument for a new
sensor type with a part number, which is different from
the one presently used.
o f
1 0
See Section 8 for Sensor Information.
Actuate the key to enter and follow the dialogue
displayed.
Remove the sensor presently installed and actuate the
r e a d y
Insert the new sensor and actuate the key to
proceed.
!
If you want the data of the new sensor to be loaded,
confirm this by pressing the key..
The new data are now loaded from the sensor into the
instrument's internal memory.
!
Allows the user to enter a different gas name than the
one stored in the sensor's data memory. Up to 7
alpha-numeric characters can be entered.
o f
1 0
Use the key to enter. The instrument will display
the actual gas name.
Use the cursor keys or to reach the
desired position. Use the cursor keys and
When the new gas name has been entered
!
completely, actuate the key to confirm or
to exit.
Configuration - Section 6
New Sensor Type
Remove Sensor
New Sensor
Load New Data ?
Loading Data !
Gas Name
6-11
Table of Contents
