Fujitsu AirStage AUXB12GALH Installation Manual
Hide thumbs
Also See for AirStage AUXB12GALH:
- Service manual (255 pages) ,
- Installation manual (144 pages) ,
- Operating manual (6 pages)
Table of Contents
Quick Links
AUXB07GALH
AUXB09GALH
AUXB12GALH
AUXB14GALH
AUXB18GALH
AUXB24GALH
TM
INSTALLATION MANUAL
INSTALLATIONSANLEITUNG
MANUEL D'INSTALLATION
APPAREIL INTÉRIEUR (type cassette)
MANUAL DE INSTALACIÓN
Únicamente para personal de servicio autorizado.
MANUALE DI INSTALLAZIONE
A uso esclusivo del personale tecnico autorizzato.
ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ
ΕΣΩΤΕΡΙΚΗ ΜΟΝΑΔΑ (Τύπος Κασέτας)
Μόνο για εξουσιοδοτημένο τεχνικό προσωπικό.
MANUAL DE INSTALAÇÃO
РУКОВОДСТВО ПО УСТАНОВКЕ
ВНУТРЕННИЙ МОДУЛЬ (кассетного типа)
Только для авторизованного обслуживающего персонала.
INDOOR UNIT (Cassette Type)
For authorized service personnel only.
INNENGERÄT (Kassettentyp)
Nur für autorisiertes Fachpersonal.
Pour le personnel agréé uniquement.
UNIDAD INTERIOR (Tipo casete)
UNITÀ INTERNA (tipo a cassetta)
UNIDADE INTERIOR (Tipo Cassete)
Apenas para técnicos autorizados.
MONTAJ KILAVUZU
İÇ ÜNİTE (Kaset Tipi)
Yalnızca yetkili servis personeli için.
PART NO. 9371022253
Table of Contents
Related Manuals for Fujitsu AirStage AUXB12GALH
Summary of Contents for Fujitsu AirStage AUXB12GALH
- Page 1 INSTALLATION MANUAL INDOOR UNIT (Cassette Type) For authorized service personnel only. INSTALLATIONSANLEITUNG INNENGERÄT (Kassettentyp) Nur für autorisiertes Fachpersonal. MANUEL D’INSTALLATION APPAREIL INTÉRIEUR (type cassette) Pour le personnel agréé uniquement. AUXB07GALH MANUAL DE INSTALACIÓN AUXB09GALH AUXB12GALH UNIDAD INTERIOR (Tipo casete) AUXB14GALH Únicamente para personal de servicio autorizado.
-
Page 2: Table Of Contents
INSTALLATION MANUAL This mark indicates procedures which, if improperly performed, CAUTION might possibly result in personal harm to the user, or damage PART NO. 9371022253 to property. VRF system indoor unit (Cassette type) Read carefully all security information before use or install the air conditioner. CONTENTS Do not attempt to install the air conditioner or a part of the air conditioner by yourself. -
Page 3: Accessories
CASSETTE GRILLE ACCESSORIES 2.3. Accessories WARNING Name and Shape Q’ty Application For installation purposes, be sure to use the parts supplied by the manufacturer or other Connector cover For covering connector prescribed parts. The use of non-prescribed parts can cause serious accidents such as the unit to fall, water leakage, electric shock, or fi... -
Page 4: Installation Dimensions
Decide the mounting position with the customer as follows: * For a 3-way outlet, make sure to perform the Function Setting on the remote controller. Also, make sure to use the optional shutter panel to block the outlet. (1) Install the indoor unit on a place having a suffi cient strength so that it withstands * The ceiling height cannot be set in the 3-way outlet mode. -
Page 5: Pipe Installation
Special nut A CAUTION 30 mm or more Install heat insulation around both the gas and liquid pipes. Failure to do so may cause Hook water leaks. After installing the body, Use heat insulation with heat resistance above 120 °C. (Reverse cycle model only) tighten the nuts. -
Page 6: Installing Heat Insulation
4.3.3. Pipe connection 5. INSTALLING DRAIN PIPES When the fl are nut is tightened properly by your hand, hold the body side coupling with a separate spanner, then tighten with a torque wrench. (See the table below for the fl are WARNING nut tightening torques.) Do not insert the drain piping into the sewer where sulfurous gas occurs. -
Page 7: Electrical Wiring
Working procedure 6. ELECTRICAL WIRING (1) Install the attached drain hose to the drain port of the body. Install the hose band from the top of the hose within the graphic display area. (2) Use vinyl adhesive agent to glue the drain piping (PVC pipe VP25) which is prepared WARNING on site or elbow socket. -
Page 8: Electrical Requirement
*1: When connecting to the Heat Recovery System, refer to the installation manual of the 6.1. Electrical requirement RB unit. *2: Earth (Ground) the remote controller if it has an earth (ground) cable. *3: When connecting the 2-wire type remote controller, Y3 is not used. Voltage rating 230 V (Crossover wiring of power supply) -
Page 9: Connection Of Wiring
Ring terminal 6.4. Connection of wiring Strip 10 mm (1) Remove the control box cover and install each connection cable. Control box cover Sleeve Screw Screw with Screw with special washer special washer Cable Ring terminal Ring terminal Terminal block Cable WARNING Use ring terminals and tighten the terminal screws to the specifi... -
Page 10: External Input And External Output (Optional Parts)
● Dry contact terminal ([CNA02], [CNA04]) 6.5. External input and external output (Optional When a power supply is unnecessary at the input device you want to connect, use the Dry parts) contact terminal ([CNA02], [CNA04]). P.C.B Controller PCB DIP switch CNA02 Output terminal (SET 2) -
Page 11: Field Setting
● When function setting is “Emergency stop” mode. Operation behavior [In the case of “Edge” input] Connector Output voltage Status Connector Input signal Command Stop External output1 OFF → ON Emergency stop Pins 1-2 Ch1 of CNA01 or CNA02 DC 12 V Operation ON →... -
Page 12: Setting The Address
7.1. Setting the address Rotary Switch Rotary Switch Address Address Setting Setting REF AD SW IU AD SW CAUTION Refrigerant Indoor unit circuit × 10 × 1 × 10 × 1 Use an insulated screwdriver to set the dip switches. Rotary switch Example: “0”... -
Page 13: Switching The Upper Limit Of Cooling Temperature
Custom code setting for indoor unit 7.4. Function setting Set the DIP switch SET 3 SW1 , SW2, referring to the Table B. • FUNCTION SETTING can be performed with the wired or wireless remote controller. (The remote controller is optional equipment) •... -
Page 14: Cassette Grille Installation
7.4.1. Button name and function Function number Item Setting number Indoor unit address 00 to 63 Refrigeration address 00 to 99 For use with a remote controller, set all rotary switches to 0, and refer to “7.1. Setting the address” for details. All switches are set to 0 at the factory. -
Page 15: Install Cassette Grille To Indoor Unit
8.2. Install cassette grille to indoor unit 8.3. Attach the intake grille (1) Install the cassette grille on the indoor unit. The installation is the reverse of “REMOVING THE INTAKE GRILLE”. The intake grille can be rotated and installed 4 ways to suit the user’s preference. “DRAIN”... -
Page 16: Error Codes
Wired Remote Controller Display 11. ERROR CODES UTY-RNKY / UTY-RNKG / UTY-RNKYT (3-wire type) If you use a wired type remote controller, error codes will appear on the remote control- ler display. If you use a wireless remote controller, the lamp on the photodetector unit Error code will output error codes by way of blinking patterns.