Hitachi Relion 670 Series Communication Protocol Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Power distribution unit
  5. Relion 670 Series
  6. Communication protocol manual
Hitachi Relion 670 Series Communication Protocol Manual

Hitachi Relion 670 Series Communication Protocol Manual

Hide thumbs Also See for Relion 670 Series:
Table of Contents

Quick Links

Relion 670 SERIES
DNP, 670 series
Version 2.2
Communication protocol manual
Table of Contents
loading

Related Manuals for Hitachi Relion 670 Series

Summary of Contents for Hitachi Relion 670 Series

  • Page 1 Relion 670 SERIES DNP, 670 series Version 2.2 Communication protocol manual...
  • Page 3 Document ID: 1MRK511391-UUS Issued: June 2023 Revision: L Product version: 2.2 © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 4 Copyright This document and parts thereof must not be reproduced or copied without written permission from Hitachi Energy, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software and hardware described in this document is furnished under a license and may be used or disclosed only in accordance with the terms of such license.
  • Page 5 In case any errors are detected, the reader is kindly requested to notify the manufacturer. Other than under explicit contractual commitments, in no event shall Hitachi Energy be responsible or liable for any loss or damage resulting from the use of this manual or the application of the equipment.
  • Page 6 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by Hitachi Energy in accordance with the product standard EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.

  • Page 7: Table Of Contents

    3.8.2 Class assignment........................21 Fault record..........................21 Section 4 DNP3 parameters....................23 Parameter descriptions......................23 4.1.1 Serial optical and RS485 communication channel settings.............26 Parameter list..........................27 DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 8 Table of contents 1MRK511391-UUS Rev. L 4.2.1 Parameter list for optical and RS485 communication channel..........27 4.2.2 Parameter list for TCP/IP......................32 Section 5 Glossary......................43 Glossary............................ 43 DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 9: Introduction

    Application manual Technical manual Communication protocol manual Cyber security deployment guideline IEC07000220-4-en.vsd IEC07000220 V4 EN-US Figure 1: The intended use of manuals throughout the product lifecycle DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 10: Document Revision History

    Ethernet ports with RJ45 connector added. 2018–03 2.2.1 Document enhancements and corrections 2018–06 2.2.2 Technical data updated for PSM. Case dimensions updated. Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 11: Related Documents

    Documents related to RED670 Document numbers Application manual ANSI: 1MRK505376-UUS Commissioning manual ANSI: 1MRK505378-UUS Product guide 1MRK505379-BEN Technical manual ANSI: 1MRK505377-UUS Type test certificate ANSI: 1MRK505379-TUS DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 12 ANSI: 1MRK511408-UUS Type test certificate ANSI: 1MRK511410-TUS Documents related to RER670 Document numbers Application manual Commissioning manual Product guide 1MRK506378-BEN Technical manual Type test certificate DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 13: Document Symbols And Conventions

    • Dimensions are provided both in inches and millimeters. If it is not specifically mentioned then the dimension is in millimeters. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 15: Dnp3 Overview

    Many implementations use serial communication based on RS-232, RS-485 or even fiber optics. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 16 Controlling all aspects of the data link excluding data link configuration Transport responsibilities: • Exchange of SDUs between peer DNP3 transport pseudo layers • Error notification to transport users • Sequencing of SDUs DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 17: Documentation

    This implementation of DNP3 is fully compliant with DNP3 Subset Definition Level 2, and contains significant functionality beyond Subset Level 2. See the device profile for further information. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 19: Vendor-Specific Implementation

    Further documentation concerning DNP3 TCP/IP communication is available in the IP Networking document Volume 7, from www.dnp.org. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 20: Dnp3 Udp-Only Mode

    Object unknown. Generally means that the function code could be processed but the object group / variation could not be processed Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 21: Event Reporting

    CROB. Thereby pulse trains of different characteristics and lengths can be generated, and the outputs from the automation bits component can be connected to other function blocks in PCM600. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 22: Apparatus Control

    As an alternative, it is recommended that actual status values affected by CROB points should be mapped as BI or DI. Requesting CROBs on the Open and Close points of SCSWI operate the breaker. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 23: Time Synchronization

    The PCM600 tool contains four value arguments related to the scaling methods: sourceMinVal, sourceMaxVal, destMinVal and destMaxVal. The use of these arguments differs depending on the scaling method. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 24: Analog Input Signal Scaling For Dnp3 Master Presentation

    MMXU calculates the RMS values for the most used analog signals like, V, I, P, Q, for example. The RMS values are available in floating point presentation as output signals of function blocks of type MMXU. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 25 MaxSourceVal (as it is given in the IED as floating point) is in the range of a 32-bit signed integer value (max. 32-bit = 2 147 483 648). DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 26: Dnp3 Points

    The DNP3 point map is configurable in PCM600. All points in the IED may be remapped. In PCM600, the unmapped points in the variables list on the left may be inserted to the active point list on the right. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 27: Class Assignment

    In addition, the magnitude, angle, fault magnitude and fault angle are provided for up to 30 of DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 28 Vendor-specific implementation the analog channels connected to the disturbance recorder, and for the last 10 analog channels, the calculated value at the trigger time is provided. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 29: Dnp3 Parameters

    Operation determines the operation of the master session. 0 = Disabled . 1 = Enabled . SlaveAddress defines the DNP3 address of this master session. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 30 Enable Unsolicited Response request is received from the master. Thus, this value should generally be 0. However, some masters do not DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 31 PairedPoint enables the Object12 Close request on an even-index point to access the next-index point. tSelectTimeout specifies the maximum amount of time that a select remains valid before the corresponding operate is received. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 32: Serial Optical And Rs485 Communication Channel Settings

    This is generally useful when using a modem or some other communication device that requires a minimum time between receive and transmit. ApLayMaxRxSize specifies the maximum application fragment size received in octets. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 33: Parameter List

    PID-4060-SETTINGS v5 Table 4: RS485GEN Non group settings (basic) Name Values (Range) Unit Step Default Description WireMode Four-wire Four-wire Two or four wire mode Two-wire DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 34 2:DIEv+AbsTime 3:DIEv+RelTime Obj10DefVar 1:BO 2:BO+Flags Object 10, default variation 2:BO+Flags Obj20DefVar 1:CNT32+Flags 5:CNT32 Object 20, default variation 2:CNT16+Flags 5:CNT32 6:CNT16 Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 35 5.00 Unsolicited response class 1 event buffer timeout UREvCntThold2 1 - 100 Unsolicited response class 2 event count report treshold Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 36 0.001 0.000 Rx to Tx minimum delay in s ApLayMaxRxSize 20 - 2048 2048 Application layer maximum Rx fragment size Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 37 RTS warm-down in s tBackOffDelay 0.000 - 60.000 0.001 0.050 RS485 back-off delay in s tMaxRndDelBkOf 0.000 - 60.000 0.001 0.100 RS485 maximum back-off random delay in s DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 38: Parameter List For Tcp/Ip

    Step Default Description ApLayMaxRxSize 20 - 2048 2048 Application layer maximum Rx fragment size ApLayMaxTxSize 20 - 2048 2048 Application layer maximum Tx fragment size DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 39 Slave address MasterAddress 0 - 65519 Master address ValMasterAddr Validate source (master) address MasterIP-Addr 0 - 18 0.0.0.0 Master IP-address Address Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 40 Application layer confim timeout ApplMultFrgRes Enable application for multiple fragment response ConfMultFrag Confirm each multiple fragment UREnable Unsolicited response enabled Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 41 Use average of 3 time requests PairedPoint Enable paired point tSelectTimeout 1.0 - 60.0 30.0 Select timeout tBrokenConTout 0 - 3600 Broken connection timeout tKeepAliveT 0 - 3600 Keep-Alive timer DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 42 1:AI32Int 3:AI32IntWithoutF Object 30, default variation 2:AI16Int 3:AI32IntWithoutF 4:AI16IntWithoutF 5:AI32FltWithF 6:AI64FltWithF Obj32DefVar 1:AI32IntEvWoutF 1:AI32IntEvWoutF Object 32, default variation 2:AI16IntEvWoutF 3:AI32IntEvWithFT 4:AI16IntEvWithFT 5:AI32FltEvWithF 6:AI64FltEvWithF 7:AI32FltEvWithFT 8:AI64FltEvWithFT DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 43 Time synch timeout before error status is generated TSyncReqAfTout Time synchronization request after timeout Averag3TimeReq Use average of 3 time requests PairedPoint Enable paired point Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 44 2:DIChWithTime 3:DIChWithRelTim Obj10DefVar 1:BO 2:BOStatus Object 10, default variation 2:BOStatus Obj20DefVar 1:BinCnt32 5:BinCnt32WoutF Object 20, default variation 2:BinCnt16 5:BinCnt32WoutF 6:BinCnt16WoutF Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 45 5.00 Unsolicited response class 1 event buffer timeout UREvCntThold2 1 - 100 Unsolicited response class 2 event count report treshold Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 46 Object 1, default variation 2:BIWithStatus Obj2DefVar 1:BIChWithoutTime 3:BIChWithRelTim Object 2, default variation 2:BIChWithTime 3:BIChWithRelTim Obj3DefVar 1:DIWithoutFlag 1:DIWithoutFlag Object 3, default variation 2:DIWithFlag Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 47 Class 2 Class 1 and 2 Class 3 Class 1 and 3 Class 2 and 3 Class 1, 2 and 3 Table continues on next page DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 48 Use average of 3 time requests PairedPoint Enable paired point tSelectTimeout 1.0 - 60.0 30.0 Select timeout tBrokenConTout 0 - 3600 Broken connection timeout tKeepAliveT 0 - 3600 Keep-Alive timer DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...

  • Page 49: Glossary

    Circuit breaker Combined backplane module CCITT Consultative Committee for International Telegraph and Telephony. A United Nations-sponsored standards body within the International Telecommunications Union. CAN carrier module DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 50 Dead line live bus Distributed Network Protocol as per IEEE Std 1815-2012 Disturbance recorder DRAM Dynamic random access memory Disturbance report handler Digital signal processor DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 51 High-level data link control, protocol based on the HDLC standard HFBR connector type Plastic fiber connector HLV circuit Hazardous Live Voltage according to IEC60255-27 Human-machine interface HSAR High speed autoreclosing High-availability Seamless Redundancy DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 52 Ingression protection, according to IEC 60529, level IP54-Dust-protected, protected against splashing water. Internal failure signal IRIG-B: InterRange Instrumentation Group Time code format B, standard 200 International Telecommunications Union DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 53 Protection and control IED manager PC-MIP Mezzanine card standard PELV circuit Protected Extra-Low Voltage circuit type according to IEC60255-27 PCI Mezzanine card Permissive overreach POTT Permissive overreach transfer trip DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 54 Status of fault Strömberg Protection Acquisition (SPA), a serial master/slave protocol for point- to-point and ring communication. DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 55 "Z", which stands for longitude zero. Undervoltage Weak end infeed logic Voltage transformer X.21 A digital signalling interface primarily used for telecom equipment DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 56 Three times zero-sequence current.Often referred to as the residual or the ground-fault current Three times the zero sequence voltage. Often referred to as the residual voltage or the neutral point voltage DNP, 670 series Communication protocol manual © 2017 - 2023 Hitachi Energy. All rights reserved...
  • Page 58 Hitachi Energy Sweden AB Grid Automation Products SE-721 59 Västerås, Sweden Phone +46 (0) 10 738 00 00 https://hitachienergy.com/protection-control Scan this QR code to visit our website © 2017 - 2023 Hitachi Energy. All rights reserved...

Table of Contents