Table of Contents
Operating the appliance
en
The time, or if applicable, the residual heat indicator,
appears on the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings. ~ "Basic settings" on page 17
Starting the operation
You must press the l Start/Stop button to start each
operation.
After starting the appliance, the time display is shown
on the display along with the settings. The display ring
and the heating line also appear.
Pausing the operation
You can also interrupt and then continue an operation
using the l Start/Stop button.
If you press and hold the l Start/Stop button for
approx. 3 seconds, the operation is cancelled and all
settings are reset.
The fan may continue to run after an operation
Note:
has been paused or cancelled.
Selecting an operating mode
Once the appliance is switched on, the default
operating mode is displayed.
If you would like to select a different operating mode,
you can do so using the menu. You can find detailed
descriptions of the individual operating modes in the
corresponding sections.
The following always applies:
Touch the appropriate text field.
1.
The function is highlighted.
Turn the rotary selector to change the highlighted
2.
selection.
If necessary, apply other settings.
3.
To do this, touch the appropriate text field and
change the value using the rotary selector.
Press the l Start/Stop button to start.
4.
The appliance starts the operation.
14
Setting the type of heating and temperature
If the "Types of heating" operating mode has not been
selected, touch the "Types of heating" text field in the
menu. The selection list for the types of heating appears
on the touch-screen displays.
Example in the picture: Hot air eco . at 195 °C.
Touch the text field with the required type of heating.
1.
If necessary, scroll though the selection list using the
rotary selector.
The temperature is highlighted white.
Set the temperature using the rotary selector.
2.
Press the l Start/Stop button to start.
3.
The time on the display shows how long the
operation has already been running.
The appliance begins to heat up.
When your dish is ready, switch off the appliance using
the ÿ On/Off button.
You can also set the cooking time and an end
Note:
time for the operation on the appliance. ~ "Time-
setting options" on page 15
Changing
After starting the appliance, the temperature is
highlighted. When you move the rotary selector, the
temperature is changed and applied immediately.
To change the type of heating, first use the l Start/Stop
button to interrupt the operation and then touch the
"Type of heating" text field. The selection list is
displayed. Touch the required type of heating. The
Table of Contents
