en Troubleshooting
14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault
The appliance is not
cooling, the displays
and lighting are lit.
Side panels of the ap-
pliance are warm.
A warning signal
sounds and
flashes.
48
Cause and troubleshooting
Showroom mode is switched on.
Press and hold the temperature setting button (refri-
▶
gerator compartment) for 9 to 11 seconds until an
audible signal sounds.
Not a fault. The side panels contain pipes which heat
up during the cooling process. Units touching the ap-
pliance will not be damaged by the heat.
No action required.
Different causes are possible.
Press the temperature setting button (freezer com-
▶
partment).
a The alarm is switched off.
The appliance door is open.
Close the appliance door.
▶
External ventilation openings are covered up.
Remove any obstructions from in front of the ex-
▶
ternal ventilation openings.
Larger quantities of fresh food have been put in.
Do not exceed the max. freezing capacity.
▶
→ "Freezing capacity", Page 44