Table of Contents
Available languages
Available languages
ENGLISH
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with
a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner. Never let
any liquid get inside the tool and never immerse any par of
the tool into liquid.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
switch off.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
from the interior (when fi tted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fi tted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new
plug.
Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fi tting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed
Z
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
8
(Original instructions)
Technical data
Input voltage
V
Power input
W
No-load speed
Min
Max. depth of cut
mm
Blade diameter
mm
Blade bore
mm
Blade tip width
mm
Maximum material capacity
Wood
mm
PVC
mm
Aluminium
mm
kg
Weight (bare unit)
Level of sound pressure according to EN 62841:
Sound pressure (L
) 93 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 104 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Vibration emission value (a
) 2.5 m/s
h,w
Vibration emission value (a
) 2.5 m/s
h,M
EC declaration of conformity
MACHINERY DIRECTIVE
%
BES510 - Mini circular saw
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN62841-1:2015, EN 62841-2-5:2014
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal fi le and makes this declaration on behalf of
Black & Decker.
BES510 type 01
Ac
-1
, uncertainty (K) 1.5 m/s
(cutting wood)
2
2
, uncertainty (K) 1.5 m/s
(cutting metal)
2
2
230
400
3600
27
85
10
1.2
27
13
3
1.92
Table of Contents
