Table of Contents
7-3. Dispenser Micro Switch
1) Disassembling Procedure
NO
DISASSEMBLING PROCEDURE
1
▷ Insert (-) screw driver into bottom hole of
Dispenser Button Guide.
Pull up forward to remove the guide.
(Be careful not to damage guide surface.)
2
▷ Remove Micro switch.
2) How to Check Micro Switch
PARTS
SPEC. NAME
: VP333A-OD-8
VOLTAGE
:125V,3A
▷Check both terminals
(red circle) with a Multi Tester
(Tester Mode : Resistance (Ω).
HOW TO CHECK
NO
DISASSEMBLING PROCEDURE
3
▷Separate wire connectors
from Micro Switch.
4
▷Check Micro Switch.
▷GOOD :
Tact Switch
(Blue Circle)
ON (Close)
OFF (Open)
▷DEFECTIVE :
Change Micro Switch.
34
CRITERION
Terminals
Tester Result
(Red circle)
(Resistance Mode)
Connected
Some Value
Disconnected
No value (0)
- Quick Links:
- Wiring Diagram
- Trouble Diagnosis
Hide quick links:
Table of Contents
