Samsung KMC-W, KM24C-3 Quick Setup Guide

Samsung KMC-W, KM24C-3 Quick Setup Guide

Also See for KMC-W:
Samsung KMC-W, KM24C-3 Quick Setup Guide

Introduction

Ports

To access the display ports, you must disassemble the display from the Connection Box.
Ports

Port Description
DC20V This port is for connecting the display's power adapter.
TOUCH This port is not a functioning port.
  • It is only used for an operation test during the manufacturing process.
(SERVICE) Connects to a USB device.
* The USB ports on the product accept a maximum constant current of 1.0 A. If the maximum value is exceeded, USB ports may not work.
ONE CONNECT Connects the display and the Connection Box using an OCM cable.

Checking the Components

  • Display: Quick Setup Guide / Warranty card (Not available in some locations) / Regulatory guide / Power cord / Power adapter
  • Connection box: Power strip / OCM cable / Screw(M4, L12) x 7 / Screw(M3, L5) x 11 / Screw(M3, L8) x 2 / Sheet cover x 2 / EFT Terminal cover holder / EFT Terminal holder guide

Contact the vendor where you purchased the product if any components are missing.
Components may differ in different locations.
The Kiosk stand is not provided. You must separately purchase and install the stand.

Specifications

Model Name KMC-W (KM24C-3)
Panel Size 24 CLASS (23.8 inches / 60.4 cm)
Display area 527.04 mm (H) x 296.46 mm (V)
Power Supply AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental considerations Operating Temperature: 0°C – 40°C (32°F – 104°F)
Humidity: 10% – 80%, non-condensing
Storage Temperature: -20°C – 45°C (-4°F – 113°F)
Humidity: 10% – 90%, non-condensing

* This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
* For detailed device specifications, visit the Samsung website.

Wall Mount Kit Specifications

Wall Mount Kit Specifications
Disassemble the rear cover of the Connection Box, remove the sheets covering the VESA holes by pressing them with a pen from the inner side of the rear cover, and then install the wall-mount bracket.

Model VESA screw hole specs (A * B) (mm) C (mm) Thread size Quantity
KMC-W (KM24C-3) 200 x 200 7.0 (Min.) ~ 9.0 (Max.) M6 4

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Need Assistance?

Do you have a question about the KMC-W that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents