Samsung IW008A/-V, IW012A/-V, IW016A/-V - Digital Signage Simple User Guide

Also See for IW008A:

User manual (19 pages)

User manual (19 pages)

Table of Contents

Contents

1 Checking the Components
2 Connecting the Power Cable
- 2.1 Precautions when connecting power
3 Precautions when handling the cabinets
4 Troubleshooting Guide
5 Specifications
6 Installing the cabinets
7 Contact SAMSUNG WORLD WIDE
8 Documents / Resources
- 8.1 References
- 8.2 Download manual

Samsung IW008A/-V, IW012A/-V, IW016A/-V - Digital Signage Simple User Guide

Checking the Components

Contact the vendor where you purchased the product if any components are missing.
AC power cables may not be provided depending on the model. Contact the dealer from whom you purchased the product if you want to be purchased separately.

Connecting the Power Cable

Precautions when connecting power

If using 110V power, a maximum of 5 cabinets can be connected to the power source.
If using 220V power, a maximum of 10 cabinets can be connected to the power source.
(For detailed information, visit the install guide.)
* Exceeding the recommended maximum number of devices may produce overvoltage, causing the circuit breaker to trip down or the product to be damaged. Make sure that the number of connected devices does not exceed the recommended maximum number.
* Samsung is not liable for any problems incurred by connecting devices that exceed the recommended maximum number.
Connecting the Power Cable

Precautions when handling the cabinets

* Metal objects may adhere to the front surface of the cabinet due to its magnetism.
* If any metal object adheres, use a magnet or airgun to remove it. Be careful when removing metal objects using a magnet, as the magnet may separate the module from the cabinet.
* Be careful when holding magnetic stripe cards close, as the magnetism may affect those cards.

[Caution to prevent external shock and dropping of the product]
After removing the protective brackets, be careful not to expose the product to external shocks or vibrations.
Make sure that the product is not dropped from any height.
[Caution to prevent damage to the LED]
Be careful not to expose the product to vibrations or external shocks when it is lying flat on the floor.
[Caution to prevent damage to corners]
Take extra care to ensure that the corners of a cabinet do not get damaged.
[Caution to prevent damage to the LED]
After removing the protective brackets, do not place the product on the floor with the LED facing down.
[Caution to prevent damage to the LED from static]
Do not touch the product without anti-static gloves.

Be sure to wear anti-static gloves when touching the product.

[Caution to prevent damage to the LED]
When lifting the product, be careful that the module frame does not separate from the main frame.

Troubleshooting Guide

Issues	Solutions
The screen keeps switching on and off.	Check that the cable between the product and the PC is connected correctly.
No Signal is displayed on the screen.	Check that the product is connected correctly with a cable.
No Signal is displayed on the screen.	Check that the source device connected to the product is powered on.

Specifications

Model Name		IW008A / IW008A-V	IW012A / IW012A-V	IW016A / IW016A-V
Cabinet	Pixel Pitch	0.84 mm	1.26 mm	1.68 mm
	LED pixel configuration	Flip Chip LED
	Pixels (Row x Column)	960 x 540 pixels	640 x 360 pixels	480 x 270 pixels
	Aspect ratio (W:H)	16:9 (806.4 x 453.6)
Synchronization	Refresh rate	3840Hz/7680Hz 7680Hz may not be supported in some models.
	Video Frame rate	100/120Hz
Power Supply		AC100-240V~ 50/60Hz Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental considerations	Operating	Temperature: 0°C – 40°C (32°F – 104°F) Humidity: 10% – 80%, non-condensing
	Storage	Temperature: -20°C – 45°C (-4°F – 113°F) Humidity: 5% – 95%, non-condensing

*This device is a Class B digital apparatus.
*For detailed device specifications, visit the Samsung website.
*Open Source License Notice
To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com)

Installing the cabinets

Mounting the spacer-eva

Before installation, mount the spacer-eva near the Samsung logo on the rear of the product.
Installing the cabinets - Mounting the spacer-eva

Removing the protective brackets

Remove the safety bracket before proceeding to installation.
Removing the protective brackets

Lowering the protective cap before connection of the power cable

Be sure to lower the protective cap before installation of the cabinet, in order to connect the power cable.

warning Lower the protective cap only when connecting the AC power extension cable. Because there is a switch that selects AC power input inside the protection cap, incorrect switch operation may cause product malfunction.
Lowering the protective cap before connection

Arranging the upper docking port at the top of the cabinet

For detailed information, visit the install guide.

Place the product on the packaging cushion and then remove the module frame from the main frame.
Remove the screws from the upper docking port on the main frame, lower the docking port, and then tighten the screws again.
Reassemble the module frame to the main frame.