Related Manuals for Emerson Bettis RP3E
Summary of Contents for Emerson Bettis RP3E
- Page 1 Installation, Operation and Maintenance Manual VCIOM-15746-EN Rev. 1 April 2023 Bettis RTS Relay Board (RP3E) Electric Actuator...
- Page 2 Note Installation, Operation and Maintenance Manual April 2023 VCIOM-15746-EN Rev. 1 This page intentionally left blank.
-
Page 3: Table Of Contents
Installation, Operation and Maintenance Manual Table of Contents VCIOM-15746-EN Rev. 1 April 2023 Table of Contents Section 1: Tools Tools.........................1 Section 2: Material Material........................2 Section 3: Installation Installation........................3 Section 4: Programming Programming......................8 Table of Contents... - Page 4 Note Installation, Operation and Maintenance Manual April 2023 VCIOM-15746-EN Rev. 1 This page intentionally left blank.
-
Page 5: Section 1: Tools
Installation, Operation and Maintenance Manual Section 1: Tools VCIOM-15746-EN Rev. 1 April 2023 Section 1: Tools WARNING Remove all power supplies before doing the exchange. Always act with caution during the exchange! • Needle nose pliers • Screw driver phillips •... -
Page 6: Section 2: Material
Section 2: Material Installation, Operation and Maintenance Manual April 2023 VCIOM-15746-EN Rev. 1 Section 2: Material • 1x relay board RP3E6A (ID:13009) • 1x adapter cable (ID:16504) • 2x steel screw M3x16 (ID:952) • 3x plastic distance 8 mm (ID:9896) •... -
Page 7: Section 3: Installation
Installation, Operation and Maintenance Manual Section 3: Installation VCIOM-15746-EN Rev. 1 April 2023 Section 3: Installation Unscrew the 4 hexagon socket screws from the cover and remove it carefully. Mind the connection cable between display and logic board. Figure 4. Unscrew the 4 cross recessed screws from the existing logic board and afterwards, tilt it carefully to you. - Page 8 Section 3: Installation Installation, Operation and Maintenance Manual April 2023 VCIOM-15746-EN Rev. 1 Remove carefully the connected cables: ribbon cable and 6-, 8- and 10-pole plugs (see Figure 6, left image). Afterwards, you can remove the logic board from the control unit and disconnect the second ribbon cable on the back (see Figure 6, right image).
- Page 9 Installation, Operation and Maintenance Manual Section 3: Installation VCIOM-15746-EN Rev. 1 April 2023 Place the 8 mm plastic spacers on the relay board as shown in the top image of Figure 8. Insert the M3x16 steel screws through the holes next to the multi-pin connectors in the logic board as shown in the bottom image of Figure 8.
- Page 10 Section 3: Installation Installation, Operation and Maintenance Manual April 2023 VCIOM-15746-EN Rev. 1 Connect the 10- and 6-pole connectors to the adapter cables, then connect the blue connectors of the adapter cables to the corresponding connectors on the relay board. Figure 10.
- Page 11 Installation, Operation and Maintenance Manual Section 3: Installation VCIOM-15746-EN Rev. 1 April 2023 Connect both ribbon cable and 8-pole connector with the logic board after installing the logic + relay board back to the control (two small screws for original installation will remain).
-
Page 12: Section 4: Programming
“Uninstall Extension Kit” and press “Apply” (see Figure 13). Then, select items 3 and 4 from the list to uninstall “Standard Bin.Input: 5x Standard Binary Inputs” and “Standard Bin.Outputs: 8x Standard Binary Outputs” (see Figure 14). Figure 13. Figure 14. Emerson Classifica�on: Internal Programming... - Page 13 Section 4: Programming Installation, Operation and Maintenance Manual VCIOM-15746-EN Rev. 1 April 2023 After successful uninstallation of the binary inputs and outputs, use the Wizard to choose the function “Extension Kit Install” and press “Apply”. Figure 15. At the line “RP3E6A: 6x Relay Outputs, 3x Inputs” press “Apply” and confirm the installation by selecting “YES”.
- Page 14 P. R. China Székesfehérvár 8000 T +86 22 8212 3300 Hungary The Emerson logo is a trademark and service mark of Emerson Electric Co. T +36 22 53 09 50 Bettis is a mark of one of the Emerson family of companies.