Table of Contents
Installation
STEP 6 Temperature Alarm (applicable models only)
• The refrigerator blinks '- -' on the temperature display with an alarm if the freezer
compartment is too warm. This may occur if the freezer becomes too warm after there
has been a power failure.
• If this happens, press Freezer. Whichever warmer temperature is displayed for 5
seconds. Then the actual temperature is displayed. To deactivate the alarm, press Door
Alarm.
STEP 7 Final check
When installation is complete, confirm that:
• The refrigerator is plugged into an electrical outlet and grounded properly.
• The refrigerator is installed on a flat, level surface with a reasonable clearance from the
wall or the cabinet.
• The refrigerator is level and is sitting firmly on the furniture.
• The door opens and closes freely, and the interior light turns on automatically when you
open the door.
38
English
Untitled-1 38
2022-11-25
10:37:01
Table of Contents
