Recording - Sharp XL-30H Operation Manual
Hide thumbs
Also See for XL-30H:
- Quick manual (4 pages) ,
- Service manual (64 pages) ,
- Service manual (64 pages)
Table of Contents
*XL-30H(SUK)P14-P18
Downloaded from:
http://www.usersmanualguide.com/
RECORDING
When recording important selections, be sure
to make a preliminary test to ensure that the
desired material is being properly recorded.
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
The VOLUME, BASS and TREBLE controls may
be adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
Metal and CrO
tapes should not be used for
2
recording.
Recording from the built-in CD player
(CD Synchronised Recording System)
1
5
2
1
Press the ON/STAND-BY button to turn the
power on.
2
Press the FUNCTION button until "Cd" or "no
dISC" appears in the display.
3
Load the desired disc.
Use the APMS function to store the tracks you
want to record in memory. (See page 13.)
4
Load a cassette into the cassette compartment.
5
Press the REC PAUSE button.
"REC" will flash.
6
Press the 0 button.
To stop recording:
Press the
button.
The tape will stop. When the
again, the CD will stop.
When you press the CD
button on the remote
control, the CD and tape will stop.
Recording from the built-in radio
3
1
6
Tune in to the desired station. (See pages 15 -
16.)
2
Load a cassette into the cassette compartment.
3
Press the REC PAUSE button.
"REC" will flash.
Note:
If a whistling noise is heard whilst recording from
an AM station, move the AM loop aerial to a po-
4
sition where noise is no longer heard from the
unit.
4
Press the 0 button.
To stop recording:
Press the
Erasing a recorded tape
1
Press the FUNCTION button until "TP" appears
in the display.
2
Press the REC PAUSE button.
"REC" will flash.
3
Press the 0 button.
button is pressed
17
17
4
2
button.
00.2.2, 3:57 PM
Table of Contents
