PREFACE
Thank you for purchasing the LQFP-48P (0.5 mm pitch) *
213) for the F
MB2146-213 is a header board used to connect the MCU board (model number : MB2146-301,
MB2146-303) which mounts F
This manual explains the handling of the MB2146-213. Before using MB2146-213, be sure to read
this manual.
Consult the Sales representatives or the Support representatives of Fujitsu Limited for mass-pro-
duced MCUs and evaluation MCUs which correspond on MB2146-213.
MB2146-213 is an object about MCU with a built-in LCD controller.
*1 : The lead pitch of package (FPT-48P-M26) is 0.5 mm and the body size is 7 mm × 7 mm.
*2 : F
■ Caution of the products described in this document
The following precautions apply to the product described in this manual.
CAUTION
Cuts
Damage
Damage
2
2
MC *
-8FX family.
2
MC-8FX family evaluation MCU to a user system.
2
MC is the abbreviation used for FUJITSU Flexible Microcontroller.
The wrong use of a device will give an injury and may cause malfunction on cus-
tomers system.
This product has parts with sharp points that are exposed.
Do not touch an edge of the product with your bare hands.
When connecting the header board to the user system, correctly position the index
mark (▲) on the NQPACK mounted on the user system with the 1 pin direction(1)
on the header board, otherwise the MCU board and user system might be dam-
aged.
When mounting a mass production MCU, correctly position pin 1, otherwise the
mass production MCU and user system might be damaged.
1
header board (model number : MB2146-
i
