Table of Contents
Flexible Power Management
If you are experiencing network performance issues, and suspect the scanner is
interfering with other devices, you can turn down the power output of the scanner.
This reduces the range between the scanner and a base or an Access Point as
shown in the following illustration:
Scan one of the barcodes below to set the scanner's power output to Full Power
(100%), Medium Power (35%), Medium Low Power (5%), or Low Power (1%).
Default = Full Power.
Batch Mode
Note: Batch Mode is only supported by the Honeywell Charge and Communication Base
(CCB) and Honeywell Access Point (AP).
Voyager XP User Guide
* Full Power
Medium Low Power
802.11
Scanner
LAN
Medium Power
Low Power
53
- Quick Links:
- Connect the Device
- Connect with Usb
Hide quick links:
Table of Contents
