Confirming The Usage Area - Panasonic KX-HNS104C Installation Manual

Home network system glass break sensor
Table of Contents
Available languages

Available languages

Setup
Before you can use the sensor, it must
be registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the [Home
Network] app.
Note:
R For information about deregistering
devices, refer to the User's Guide
(page 16).
Using registration buttons
1
Hub:
Press and hold M
DEVICEN until the LED indicator
blinks slowly in green.
2
Sensor:
Press and hold M
LED indicator blinks slowly in
green (page 8).
R When registration is complete,
Note:
R To cancel without registering the
sensor, press M
on the sensor again.
R If registration fails, the hub sounds
several short beeps.
Using the app
When you register the sensor by using
the [Home Network] app, you can
assign a name to your devices and
group them by location. For more
information, refer to the User's Guide
(page 16).
10
PNQX7289YA_(en-en)_0907_ver.200.pdf
OTHER
N until the
the hub sounds one long beep.
N on the hub and
For assistance, visit www.panasonic.ca/english/support
10
Confirming the
usage area
Wireless communication
range
The wireless communication range of
each device in the system from the hub
is approximately 50 m (160 feet)
indoors and approximately 300 m
(1,000 feet) outdoors. Wireless
communication may be unreliable
when the following obstacles are
located between the hub and other
devices.
R Metal doors or screens
R Walls containing aluminum-sheet
insulation
R Walls made of concrete or
corrugated iron
R Double-pane glass windows
R Multiple walls
R When using each device on
separate floors or in different
buildings
Note:
R You can check the sensor's
communication status by pressing
M
N. If the LED indicator is lit in
green or red, the sensor is
communicating properly with the
hub. If the LED indicator blinks in
red, it is out of range of the hub.
Usage area cautions
Using the sensor in the following areas
may cause deformation, malfunction, or
operational failure.
R In direct sunlight
R Areas exposed to grease or steam,
such as kitchens
2015/09/07
16:13:55
Table of Contents
loading

Table of Contents