Table of Contents
When you start the imaging, the control panel is locked to avoid accidental
interruption of the imaging process. A progress bar is displayed at the top of the
image as a graphic image and as the number of seconds remaining to show how much
time is left to complete the image.
The Stitch Line
The 3D imaging must be completed before you can begin to analyze the resulting
data in any direction. The stitch line is only shown in the final 3D image result.
To hide the stitch line – on Flex Focus 1202:
Hide or show
stitch line
1
To hide the stitch line – on Pro Focus 2202 UltraView:
1
2
3D Mover
The 3D mover is automatically selected, so you cannot change this parameter on the
system. Untracked 3D acquisition, available with some transducers, is not an option
for this transducer.
Select the Mover parameter on the screen. There are two options:
•
•
Cleaning after Use
WARNING Reproc-w3
Immediately after use, you must pre-clean the device until visually clean (including
device lumens if existing). Conduct the thorough cleaning process as soon as
possible after use in order to prevent bioburden drying on the surface. Dried
bioburden can lead to inefficient cleaning, disinfection and sterilization, causing a
risk of cross-contamination.
If pre- and thorough cleaning cannot be done immediately, keep the device moist until
cleaning.
Use a suitable brush to make sure that biological material and gel are removed from
all channels and grooves. See Care and Cleaning for cleaning instructions.
8838 User Guide (BB1857-H)
On the 3D General tab, click Stitch line to hide or show the stitch line.
See the Flex Focus Advanced User Guide for more information about how to
assign screen keys.
On the right side, click Layout.
In the drop-down menu, click Stitch line to hide or show the stitch line.
IP8838 – Moves the internal array while you hold the transducer still.
Untr. Fan (Untracked Fan) – Lets you freely move the transducer to acquire
images. See the system user guide for the untracked freehand warning
information, as well as the extended system user guide for image issues
concerning untracked freehand acquisition.
Cleaning after Use
13
Table of Contents
