Coupon GS1 DataBar Output
If you scan coupons that have both UPC and GS1 DataBarcodes, you may wish to
scan and output only the data from the GS1 DataBarcode. Scan the GS1 Output On
code below to scan and output only the GS1 DataBarcode data. Default = GS1
Output Off.
* GS1 Output Off
UPC-E0
UPC-E0 On/Off
Most U.P.C. barcodes lead with the 0 number system. To read these codes, use the
UPC-E0 On selection. If you need to read codes that lead with the 1 number
system, use
* UPC-E0 On
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format. Default =
Off.
On
Vuquest 3320g User Guide
UPC-E1
on page 119. Default = On.
GS1 Output On
UPC-E0 Off
117