Panasonic WJ-HD309 Operating Instructions Manual page 112
Digital disk recorders
Hide thumbs
Also See for WJ-HD309:
- Operating instructions manual (164 pages) ,
- Setup instructions (101 pages) ,
- Network operating instructions (72 pages)
Table of Contents
G [Monitor 2] Switcher function of monitor 2
Perform the settings for the switcher function of monitor 2.
SETUP MENU
Monitor 1
Monitor 2
8 Live Sequence
The settings for "Live Sequence" are the same as for
"Monitor1". Refer to page 110 for further information.
8 Sequence Timing
The settings for "Sequence Timing" are the same as for
"Monitor1". Refer to page 111 for further information.
Notes:
• Select "EXT" when an external device that can transmit
a sequence signal is connected.
• The sequence changeover I/O (pin no.21) of the
ALARM/CONTROL connector on the rear panel will
supply signals when "INT" is selected and will receive
signals when "EXT" is selected.
8 Auto Skip
The settings for "Auto Skip" are the same as for "Monitor1".
Refer to page 111 for further information.
8 Login Screen
The settings for "Login Screen" are the same as for
"Monitor1". Refer to page 111 for further information.
112
Maintenance
Recording
Event
Schedule
LIVE
Switcher
Display
Comm
System
I
Live Sequence
SETUP
I
Sequence Timing
INT
I
Auto Skip
OFF
I
Login Screen
CAM1
Table of Contents
