Black & Decker VCBD8530 - Vacuum Cleaner Manual

OVERVIEW

Product may vary slightly from what is illustrated.

1. On/Off button (not shown)
2. Retractable cord push button (not shown)

Note: † indicates consumer replaceable/removable parts

HOW TO USE

This appliance is intended for household use. It is for indoor use only.

The power cord has a yellow marking and a red marking to help you determine the maximum length to use. Up to the yellow marking is the recommended length. Never pull cord beyond the red marking.
This vacuum cleaner is equipped with an overheat protection system. If for some reason your vacuum overheats, the motor will turn off. Should this occur, turn the switch off and unplug the vacuum from the wall outlet. Allow the motor to cool for a minimum of 15 minutes prior to re-starting the unit. To prevent overheating make sure that the filters and the dust bin are clean.

1. Press the On/Off push button to start the vacuum cleaner.
2. As you vacuum, check the removable plastic dust collector frequently; when the dust collector is full empty it.
   To empty the dust collector, see Dust Collect or in the Care and Cleaning section.
3. When finished vacuuming, press the On/Off push button to turn off the unit.
4. Press the retractable cord push button .The cord winds back into the unit.
   

VACUUM ACCESORIES

CREVICE TOOL: use to clean edges, corners, and sides of upholstery.
EXTENSION TUBES: use in combination with flexible hose for added length and height.
FLEXIBLE SWIVEL HOSE: flexible hose with an adjustable suction feature.
COMBINATION FLOOR BRUSH: use to vacuum grime on all surfaces.

CARE AND CLEANING

This appliance contains no user-serviceable parts. Refer service to qualified service personnel.

Always turn off and unplug the unit before cleaning any parts.

CLEANING

Note: To maintain maximum cleaning performance, empty the dust collector when is at max level, and clean or replace the HEPA exhaust filter, the cyclonic filter, and the motor dust filter often.

DUST COLLECTOR

CYCLONIC FILTER
To remove the cyclonic filter

To replace cyclonic filter

1. Insert the cyclonic filter into the dust collector and aline the arrow ( ) on the top of the filter with the arrow ( ) on dust collector.

Tip: Pull on the handle to verify that it is secured in place.

INTAKE FILTER

The intake filter is located at the top of the dust collector inside the lid.

The HEPA exhaust filter is located at the back of the canister.

NEED HELP?
For service, repair or any questions regarding your appliance, call the appropriate 800 number on cover of this book. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of this manual.

TWO-YEAR LIMITED WARRANTY
(Applies only in the United States and Canada)

What does it cover?

For how long?

What will we do to help you?

How do you get service?

• Visit the online service website at www.prodprotect.com/applica, or call toll-free 1-800-231-9786, for general warranty service

What does your warranty not cover?

How does state law relate to this warranty?

Documents / Resources

References

• prodprotect.com

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.