Table of Contents
Radial 8 & 88 Operation Reference Manual
Sequencer Fuse Panel
1FU
2FU
3FU
4FU
5FU
DISP HD
DISP HD
DISP HD
DISP HD
DISP HD
1-20
21-40
41-60
61-80
81-100
8A, 32V
8A, 32V
8A, 32V
8A, 32V
8A, 32V
SLOW BLOW
SLOW BLOW
SLOW BLOW
SLOW BLOW
SLOW BLOW
START Push Button
Use the START push button to initiate the production mode from the stop
mode. The START push button is illuminated when it is active and can be
used to start the machine. This button will not function when the machine is
in maintenance mode. The START push button is located on the control
panel on the first 20 station sequencer module.
Sequencer LED Indicators
The sequencer LED indicator is mounted on top of each sequencer module.
The LED indicator illuminates (Low Part Condition) showing which
dispensing head is nearly out of components.
Each LED indicator represents a specified dispensing head location.
The operator alert indicator illuminates to show the operator which sequencer
module has a dispensing head that is starting to run out of components.
The sequencer fuse panel contains the fuses that protect the 24 VAC wiring
to the dispense heads.
Function of Sequencer Fuse Panel Fuses
FUSE
Fuse 1FU (8 amp, 32V slow blow) protects the switched
1FU DISP HD 1-20
24VAC wiring to sequencer dispense heads 1 - 20.
Fuse 2FU (8 amp, 32V slow blow) protects the switched
2FU DISP HD 21-40
24VAC wiring to sequencer dispense heads 21 - 40.
Fuse 3FU (8 amp, 32V slow blow) protects the switched
3FU DISP HD 41-60
24VAC wiring to sequencer dispense heads 41 - 60.
Fuse 4FU (8 amp, 32V slow blow) protects the switched
4FU DISP HD 61-80
24VAC wiring to sequencer dispense heads 61 - 80.
Fuse 5FU (8 amp, 32V slow blow) protects the switched
5FU DISP HD 81-100
24VAC wiring to sequencer dispense heads 81 - 100.
This Document Supports IM-UPS 5.0 and Higher
49379902 Rev. G
FUNCTION
Page 17
Table of Contents
