Philips HD2103 - Electric Pressure Cooker Manual

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

What's in the box

(fig. 1)

Overview

Before first use

1. Take out all the accessories from the inner pot.

Note

Using the electric pressure cooker

Pressure keeping time regulating range

Preparations before cooking

Before using the electric pressure cooker to cook food, follow below preparation steps:

1. Hold the lid handle and turn it clockwise until the top lid cannot move any more, then lift it up.
   
2. Take out the inner pot from the appliance and put the prewashed food in the inner pot.
   
3. Wipe the outside of the inner pot dry, and put it back into the appliance.
   
4. Place the top lid onto the appliance and turn it anti-clockwise. You will hear a "click" sound when the top lid is properly assembled.
   
   
5. Turn the pressure regulator to the pressure cooking () or normal cooking position ()
   

Note

• To braise, fry or bake food, turn the pressure regulator to the normal cooking position ( ).

Cooking food

Note

1. Put the plug in the power socket.
   
   The Heating indicator lights up.
   The appliance starts heating and pressurizing.
2. When the appliance reaches the working pressure, the Heating indicator goes off and the Keep Pressure/Keep warm indicator lights up orange.
   
   The electric pressure cooker starts working in the pressure keeping mode.
3. When the pressure keeping time has elapsed, the control knob will be at the Off position, and the appliance automatically switches to keep warm mode.
   
   The Keep pressure/Keep warm indicator changes its color from orange to green.
4. Turn the pressure regulator to the vent position ( ).
   
   The appliance starts releasing pressure.
   The floater drops down when the pressure is released sufficiently.
5. Hold the top lid handle and turn the lid clockwise until it cannot move any more, then lift it up.
   

Note

Tip

Assembling and disassembling the pressure regulator

To disassemble the pressure regulator:

To assemble the pressure regulator:

• Put the pressure regulator back to the steam valve and make sure the regulator points at the sealed position ( ). Turn the screw clockwise until it is fastened.

Specifications

Model Number		HD2103
Rated power output		900W
Rated capacity		5.0L
Diameter		22cm
Pressure keeping time		0-60 minutes
Note

Specifications are subject to change without notice.
© 2014 Koninklijke Philips N.V. All rights reserved.