Quick Links
AUTOMATIC IN-FLOOR CIRCULATION SYSTEM
INSTALLATION
8175 W. Buckeye Rd., Phoenix, AZ 85043
Toll Free: 1.800.621.5886 • Phone: 480.893.7607 • Fax: 480.753.3397
[email protected] • www.1Paramount.com
US and Foreign patents and patents pending
see www.1paramount.com/support/patent-numbers/
Paramount products are designed by Paramount in Phoenix, Arizona, United States of America
004-027-8788-00 R00 ECN_2155
PUB081521 ©2021 Hayward Industries, Inc.
Related Manuals for Paramount Fitness ECO POOL 006-527-6316 Series
Summary of Contents for Paramount Fitness ECO POOL 006-527-6316 Series
- Page 1 AUTOMATIC IN-FLOOR CIRCULATION SYSTEM INSTALLATION 8175 W. Buckeye Rd., Phoenix, AZ 85043 Toll Free: 1.800.621.5886 • Phone: 480.893.7607 • Fax: 480.753.3397 [email protected] • www.1Paramount.com US and Foreign patents and patents pending see www.1paramount.com/support/patent-numbers/ Paramount products are designed by Paramount in Phoenix, Arizona, United States of America 004-027-8788-00 R00 ECN_2155 PUB081521 ©2021 Hayward Industries, Inc.
- Page 2 ECOPOOL SMOOTH BODY SYSTEM Item Number: 006-527-6316-XX Includes: Two-Port Four-Gear Valve Smooth Bodies with Cap Nozzles Riser Pipes Nozzle Tool ECOPOOL RIBBED BODY SYSTEM Item Number: 006-527-6315-XX Includes: Two-Port Four-Gear Valve Ribbed Bodies with Cap Nozzles Riser Pipes Nozzle Tool Please indicate your color choice by placing the appropriate color code in place of the “XX"...
- Page 3 ECOPOOL EQUIPMENT AND PLUMBING SCHEMATIC VALVE PLUMBING SCHEMATIC 2 PORT WATER VALVE 1. Floor #1 2. Wall #2 Note: If EcoPool includes SwingJets #2 wall fittings must be 1½" female threaded fittings with no inside restrictions. VALVE PLUMBING SCHEMATIC 2 PORT WATER VALVE optional Min.
- Page 4 WATER VALVE INSTALLATION NOTICE: All pipe fittings MUST be staggered. PARTS NEEDED FOR ASSEMBLY OPTION ONE • (2) 2”X15” PVC PIPE (port 1,2) • (1) 2”X18” PVC PIPE (port inlet) STAGGER 3" MINIMUM • (3) 2” SLIP 90° ELBOWS • Set in trench 15 “ deep X 12” wide Gluing instructions 1.
- Page 5 PRE-PLASTER DETAIL | SMOOTH BODY INSTALLATION NOTICE: You can use regular PVC glue on smooth body 1. Make a cutout or opening approximately 1" deep and 1" bigger than the pipe. This cutout will be filled with plaster or other finish coat to create a water stop.
- Page 6 PRE-PLASTER DETAIL | RIBBED BODY INSTALLATION NOTICE: HEAVY BODY GLUE IS REQUIRED 1. Make a cutout or opening approximately 1” deep and 1” bigger than the pipe. This cutout will be filled with plaster or other finish coat to create a water stop. 2.
- Page 7 PARAMOUNT MODULE ALIGNMENT GUIDE TO FUNCTION PROPERLY IT IS IMPERATIVE THAT THE MODULE BE PLACED IN CORRECT ORIENTATION TO THE BASE. TO ENSURE THIS IS DONE, PLEASE FOLLOW THESE INSTRUCTIONS. Figure 1 Figure 2 1. Look at the top of the Module - Figure 1 2-Port Module Base 2.
- Page 8 START-UP CLEANING NOZZLE System Start Up 1. Before installing nozzles flush all lines by: Fig. 3 a. Start pump, run for 10 minutes before installing the water valve module. b. Install the water valve module and let valve cycle to flush out any debris remaining in each line.