b.
Remove the top cover. See
c.
Remove the riser assembly or rear drive cage.
•
"PCIe adapter and riser assembly replacement" on page 96
•
"Rear drive backplane and drive cage replacement" on page 134
Step 2.
Remove the rearwall bracket.
a.
Remove the screws.
b.
Remove the bracket from the chassis as shown.
Note: The illustrations show removing the A1, B1, and C1 rearwall brackets. The procedure is the
same for removing other rearwall brackets.
Figure 90. Removing the A1 rearwall bracket (left)
Figure 91. Removing the B1 rearwall bracket (middle)
"Remove the top cover" on page
Chapter 5
161.
.
Hardware replacement procedures
131