Related Manuals for ABB 6AGC085345
Summary of Contents for ABB 6AGC085345
- Page 1 — M A N UA L Pedestal for Terra AC wallbox Installation manual • TAC pedestal single (ABB6AGC085345) • TAC pedestal back-to-back (ABB6AGC085684)
- Page 2 P E D E S TA L F O R T E R R A A C WA L L B OX...
-
Page 3: Safety Instructions
I N S TA L L AT I O N M A N U A L — Safety instructions Warning! electricians who are fully responsible for the com- pliance with existing standards and installation Not observing the safety instructions can result regulations. -
Page 4: Intended Use
P E D E S TA L F O R T E R R A A C WA L L B O X — Intended use TAC Pedestal Single Back-to-Back Pedestal A pedestal for free-standing installation in inside 6AGC085345 6AGC085684 or outside areas is available as an alternative to 2× SCREW; FLAT HEADED 4× SCREW; FLAT HEADED mounting the charging station on a wall. - Page 5 I N S TA L L AT I O N M A N U A L — Overview — — Single pedestal 6AGC085345 Back-to-back pedestal 6AGC085684 The single pedestal is designed for the The back-to-back pedestal is designed for installation of one charging station.
-
Page 6: Location Requirements
P E D E S TA L F O R T E R R A A C WA L L B O X — Warning Electrical hazard! The back-to-back pedestal must always be fitted with two charging stations! — Location requirements General: recommend creating a concrete foundation: 70 cm (L) ×... - Page 7 I N S TA L L AT I O N M A N U A L — Positioning the base Position the base below street level. The pavement can cover the base. See drawings below.
- Page 8 P E D E S TA L F O R T E R R A A C WA L L B O X — Anchoring to the base The 4x anchors (M10x40) must be used for anchoring. — Technical data Anchorage ground Standard concrete with a strength class of...
- Page 9 DETAIL C I N S TA L L AT I O N M A N U A L SCALE 1 : 2 NOTE THE IMAGES ARE VALID FOR ALL VERSIONS. Thread in cable: • Thread the connection cables from the bottom through the pedestal upwards through the cable opening.
- Page 10 P E D E S TA L F O R T E R R A A C WA L L B O X Grounding: • If necessary, connect the earthing to the pedestal's grounding point with included nut M6 UNI 5588 A2 and contact washer M6. Max torque: 4 Nm.
- Page 11 I N S TA L L AT I O N M A N U A L Mounting the charging stations • Mount the charging stations on the pedestal using the enclosed screws. • Use for top; screw type flat headed DIN 923 M5X3 (x12) Stainless steel •...
- Page 12 P E D E S TA L F O R T E R R A A C WA L L B O X — Single pedestal ABB6AGC085345 345 mm 245 mm 22,5...
- Page 13 I N S TA L L AT I O N M A N U A L — Back-to-back pedestal ABB6AGC085684 345mm 245 mm 22,5...
- Page 14 — Heertjeslaan 6, 2629 JG Delft Netherlands abb.com/terraacwallbox © Copyright 2020 ABB. All rights reserved. Specifications subject to change without notice.