The Start Time Of Sampling Data Saved In Co-Recording Is After The Time When A Trigger Is Satisfied First; Error Codes; Event Codes - Mitsubishi Electric MELSEC iQ-R Reference Manual
Programmable controller
Hide thumbs
Also See for MELSEC iQ-R:
- User manual (306 pages) ,
- User manual (276 pages) ,
- User manual (266 pages)
Table of Contents
The start time of sampling data saved in co-recording is after the
time when a trigger is satisfied first
Check point
Is the data saving period before the time when a trigger is satisfied sufficiently
secured in a device on which co-recording was performed?
6.2
Error Codes
For the descriptions and corrective actions for error codes, refer to the manual for a module used.
6.3
Event Codes
This section shows the event code list related to co-recording.
Event
Overview
code
00170
Co-recording trigger sending
00171
Co-recording trigger receiving
00172
Co-recording trigger sending/receiving
00173
Co-recording trigger sending/receiving
00174
Co-recording trigger sending/receiving
00175
Co-recording trigger sending/receiving
*1 The display in the event history differs depending on a module in which an event occurred.
For the other event codes, refer to the manual for a trigger relay device or recording device in which an event occurred.
6 TROUBLESHOOTING
28
6.2 Error Codes
Corrective action
Change the recording setting to increase the data saving period before the
time when a trigger is satisfied.
(This is because the time from when a recording trigger is satisfied to when
recording actually starts differs for each device.)
Page 22 Trigger sending/receiving pause period for co-recording
Cause
The co-recording trigger has been sent.
The co-recording trigger has been received.
As the trigger has been notified from the module compatible with co-recording trigger function, the
module has notified the trigger to other modules.
The co-recording trigger received from [Trigger relay device]
The co-recording trigger received from the network has been sent to [Trigger relay device]
The co-recording trigger received from the network has been sent to the network.
*1
has been sent to the network.
*1
.
Table of Contents
