Table of Contents
GE MEDICAL SYSTEMS
REV 21
3–6 MOVING THE RTfino/RT3200 Advantage–II/RT–x200 SYSTEM
3–6–1 Moving the RTfino/RT3200 Advantage–II/RT–x200 to Another Room
In general, a single adult can move the system along an even surface with no steep grades. At least two people should
move the machine when large humps, grooves, or grades will be encountered. (It is better to pull the console from the
rear rather than to push the console). Before moving, store all loose parts in the unit. Wrap transducers in soft cloth or
foam to prevent damage.
3–6–2 Transporting the RTfino/RT3200 Advantage–II/RT–x200 System
All shipping should be done by General Electric representatives, or their assignees. Follow the instructions in para-
graph 3–6–1, with the following additional precautions:
1.
The original packaging should be used when reshipping the unit. General Electric representatives or assignees
shall repackage the console before shipment.
2.
Carefully load the RTfino/RT3200 Advantage–II/RT–x200 system aboard the van. Use four straps to secure the
unit and prevent lateral movement. Set the unit over the van's center of gravity. Do not lay the unit down for
shipment!
3.
Prevent shock by driving at 45–55 mph on paved roads. Avoid unpaved roads and drive carefully at road and
railroad crossings.
4.
Repeat the installation procedure, completing the installation checklist, at the new site.
RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUAL
3–7
INSTALLATION AND REPLACEMENT
P9030GX
Table of Contents
