Table of Contents
6.2.1 Preservation
Rexroth delivers the planetary gearbox without oil filling. The planetary gearbox is,
however, preserved from the inside with e.g. Ri Chan Jia HE L-HL15.
The external flange surfaces and flanging surfaces are applied with preservative by
the factory (e.g. PERIGOL VCI 230 or CUSTOS 10-38).
After removing the packing, you must check whether the outside preservation is
still correct.
If the preservation is damaged and gearbox parts on the outside have bright
spots, then preserve these spots again with e.g. PERIGOL VCI 230 or
CUSTOS 10-38.
Observe the manufacturer's product data sheets and safety data sheets when
using preservative. These data sheets are not included within Rexroth's scope
of supply.
Use a brush to apply the preservative evenly onto the bright spots.
6.2.2 Maximum storage periods
The following storage conditions must be met to ensure a maximum storage period
of 12 months:
• Temperature -30 ... 60°C, relative air humidity of max. 70%
• Dry and dust-free
• Protected against rain, snow and sunlight
RE 79039-01-B/01.2021, MOBILEX GFB 8000 series 40 general operating instructions, Bosch Rexroth AG
Transport and storage
25/64
Table of Contents
