Table of Contents
Remove the system board
Prerequisites
Steps
1. Disconnect all cables from the system board.
CAUTION:
Take care not to damage the system identification button while removing the system board from
the chassis.
CAUTION:
Do not lift the system board by holding a memory module, processor, or other components.
2. Holding the system board holder, pull the blue release pin, and slide the system board toward the front of the system to
disengage the connectors from the slots on the system.
3. Incline the system board at an angle, and lift the system board out of the system.
Figure 57. Removing the system board
Replace the system board
115
Table of Contents
