Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner's Manual. Some of the content in this manual may differ from your unit.
(Standby) | Switches the unit ON or OFF. |
(Function) | Selects function. |
(Volume) | Adjusts volume. |
Play / pause | |
(Mic mute) | Enables and disables Voice recognition. |
Standby and Stops feedback of Google Assistant. |
Reset the Unit
Press and hold the on the unit until you hear the beep sound once.
HDMI OUT (TV eARC/ARC) | Connect to a TV. |
HDMI IN | Connect to device with HDMI OUT. |
OPTICAL IN | Connect to an optical device. |
USB port | Connect to a USB device. |
Make sure to properly align and connect the optical cable; improper alignment may cause damage to the jack.
Place the wireless subwoofer near the sound bar and follow steps below.
If the subwoofer does not make sound, try to connect manually.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
Connect the sound bar and TV using Optical () or HDMI ARC (.
All devices should be connected to same router.
Make sure the unit is connected to Wi-Fi.
Case 1. Say "Ok Google"
The Google Assistant only responds to voice commands when you are using Wi-Fi or BT (Bluetooth) as the input. If you are using HDMI, Optical, ARC, Optical Sound Sync, or USB input, then you must use the button to activate the Google Assistant.
Case 2. Press .
Voice command
With the Google Assistant built in, you can control compatible smart home devices such as TV's, lights, switches, plugs, thermostats and more by simply using your voice.
For more information, visit the below web site.
You can manage the speaker settings and control the speaker by using "LG Sound Bar". Download "LG Sound Bar" on the App Store or Google Play Store.
AI Room Calibration is a sound tuning tool, which adjusts the audio settings of the Sound Bar based on the room acoustics and environment. To access the AI Room Calibration it is necessary to install the "LG Sound Bar" app. On [Sound Setting] menu, choose [AI Room Calibration].
SOUND EFFECT: Selects a sound effect mode.
: Standby and Stops feedback of Google Assistant.
: Adjusts sound level of each speaker.
: Turns on or off the Night time mode.
FOLDER /: Searches a folder.
: Displays the information of a file, an input source, a connected Bluetooth device name or an application name.
AUTO POWER: Automatically turns on by an input source.
REPEAT: Listens to your files repeatedly or randomly.
Power requirements | Refer to the main label. |
Power consumption | Refer to the main label. |
Dimensions (W x H x D) | Approx. 1220.0 mm x 57.0 mm x 145.0 mm (with foot) |
Bus Power Supply (USB) | 5 V 500 mA |
Amplifier (Total RMS Output power) | 520 W RMS |
Design and specifications are subject to change without notice.
Rear Speakers Ready
Ready for surround sound with Rear Speakers Kit sold separately. (SPK8-S)
To enjoy content containing Dolby Atmos® and DTS:X®, the connected device and content must support Dolby Atmos® and DTS:X®.
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected].
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
For more information about Google's open source, visit device settings of Google Home app.
www.lg.com
Copyright © 2020-2021 LG Electronics Inc. All Rights Reserved.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.