LG SJ8 - 4.1 Ch High Resolution Audio Sound Bar Simple Manual

LG SJ8 - 4.1 Ch High Resolution Audio Sound Bar Simple Manual

Also See for SJ8:
LG SJ8 - 4.1 Ch High Resolution Audio Sound Bar Simple Manual

Introduction

Please read this manual carefully before operating your set and retain it for future reference.

To view the instructions of advanced features, visit http://www.lg.com and then download Owner's Manual. Some of the content in this manual may differ from your unit.


This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. this device may not cause harmful interference and
  2. this device must accept any interference received, including interference that may cause undesired operation of the device.

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.

FCC Radio Frequency Interference Requirements:
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.

Responsible Party:
LG Electronics USA, Inc.
1000 Sylvan Ave
Englewood Cliffs, NJ 07632
Tel: 1-800-243-0000

Front Panel

The buttons are located on the rear.
Front Panel
- Standby F
- Selects function
- Adjusts volume
- Connects wireless network.
- Adds the additional Music Flow product to your network. (In case that one or more Music Flow product is connected.)

LED indicator: Shows connection status.

  • White (Blinking): Waiting for network connection
  • White (Staying on): Network connection is completed.
  • White (Dimmed): Standby mode with network connection.
  • Green (Staying on): The first group was set.
  • Red (Staying on): Standby mode without network connection.

Rear Panel

Rear Panel
DC IN - Connect to AC Adapter
USB (Service only) - S/W download connector
LAN - Connect to router
OPTICAL IN - Connect to an optical device
HDMI IN - Connect to device with HDMI OUT.
HDMI OUT (TV ARC) -
Connect to a TV.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

  1. Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
  2. Turn on the sound bar. :
    The sound bar and wireless subwoofer will be automatically connected. The subwoofer's green LED turns on.

Manually Subwoofer Connection
If the subwoofer does not make sound, try to connect manually.

  1. Press Pairing button on the rear of the wireless subwoofer.
    • The green LED on the rear of wireless subwoofer blinks quickly.
  2. Turn on the sound bar.
  3. Pairing is completed.
    • The green LED on the rear of wireless subwoofer turns on.

warning Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 (3.3 ft) m to prevent wireless interference.

TV Connection

Connect the sound bar and TV using Optical () or HDMI ARC ().

  1. Optical Connection
    1. Connect the sound bar to the TV using Optical cable.
    2. Set up [External Speaker (Optical)] on your TV setting menu.
       Optical Connection
  2. HDMI(ARC) Connection
    1. Connect the sound bar to the TV using HDMI cable.
    2. Set up [External Speaker (HDMI ARC)] on your TV setting menu.
      HDMI(ARC) Connection

warning

  • HDMI connection is unavailable if your TV does not support HDMI ARC.
  • If this unit is connected by OPTICAL and ARC at the same time, the ARC signal is a high priority.

Additional Device Connection

  1. Connect to the external device like as follow.
    Additional Device Connection
  2. Set the input source by pressing F on the remote control or unit repeatedly.

Network Connection

  1. Check network condition. A router connected to network should be installed.
  2. Connect your smart device to your home network.
  3. Connect the sound bar to the power supply.
  4. Connect the media server to your home network in order to enjoy music.

warningAll devices should be connected to same router.

  • Download LG Music Flow Application
    Download "Music Flow Player" on the App Store or Google Play Store.
    Download LG Music Flow Application
  • Launch Music Flow Player App
    Follow the steps for wired or wireless connection displayed on the screen.

Remote control

Remote control - Replacing the batteries

SOUND EFFECT: Selects a sound effect mode.
F: Selects the function and the input source.
: Turns down the volume at night.
: Adjusts sound level of Treble, Bass and Sub-woofer.
INFO: Displays the input source information.
AV SyNC: Synchronizes the audio and video.
SLEEP: Sets the system to turn off automatically at a specified time.
AUTO VOL: Adjusts too loud or low output volume level appropriately.
AUTO POWER: Automatically turns on by an input source.

Additional Information

Specification

Power consumption Refer to the main label.
AC adapter
  • Model: DA-38A25
  • Manufacturer: Asian Power Devices Inc.
  • Input: 100 - 240 V ~ 50 - 60 Hz
  • Output: 25 V 1.52 A
Dimensions (W x H x D) Approx. 1220 mm x 38 mm x 105 mm (48.0 inch x 1.5 inch x 4.1 inch)
Amplifier (Total RMS Output power) 300 W RMS

Design and specifications are subject to change without notice.

OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CDROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [email protected]. This offer is valid for three (3) years from the date on which you purchased the product.

LG Customer Information Center

1-800-243-0000 USA, Consumer

1-888-865-3026 USA, Commercial

Register your product Online!
www.lg.com

www.lg.com
Copyright © 2017 LG Electronics. All Rights Reserved

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Table of Contents