Table of Contents
5
Trouble shooting
EPA assembly line for DaeP
Assembly Station
VPP 21
Trouble shooting
Station x
Station 2
Station 3
Fault types
Station 4
Station 5
Station 6
Station 7
The troubles within the station are distinguished as follows:
Station 8
Station 9
Station 10
Warnings
Station 11
A fault message appears in the display. The operation of the machine is
Station 12
continued.
Station 13
Station 14
Station 15
Simple faults
Station 16
The operation of the machine is interrupted. The operation is continued
Station 17
when having cleared the fault.
Station 18
Station 19
Station 20
Enduring faults
Station 21
The operation of the machine is interrupted. The fault cannot be eliminated
Station 22
by simple clearing.
Station 23
Station 24
The fault can be eliminated in another operating mode e.g. in manual or
Station 25
special mode. Then the machine can be reset into automatic operation
Station 26
mode.
Station 27
Station 28
Station 29
Fault
Station 30
The operation of the machine is interrupted and broken off.
Station 31
The machine is switched off.
Station 32
Station 33
The cause of the trouble can be eliminated by a manual operation at the
Station 34
machine.
Station 35
Then the machine can be switched on again.
Station 36
Station 37
Station 38
Defect
Station 39
The operation of the machine is interrupted and broken off.
Station 40
A part of the machine is defective and must be replaced or repaired.
Station 50
Switch off machine in accordance with this operating manual and secure
Station 60
Station 70
against being switched on unintendedly. Attach warning signs, if necessary.
Station 80
Station 90
Station 100
Station 110
Station 120
Station 130
Station 140
Station 150
Station 160
Station 170
Station 180
Station 190
Station 200
Station 210
Station 220
Station 230
Robert Bosch GmbH
Station 240
Station 250
Station 260
Station 270
M.3000314.190_0843.195.960 /
V0.0_0613_EN_PA--ATMO2
Page 3 / 6
Table of Contents
Troubleshooting
