Attach Cradle Handle :
1 - Position Handle over Cradle.
2 - Slide the Handle over extension on Cradle.
3 - Depress Snap Button on Cradle.
4 - Seat Handle until Snap Button pops through the Handle hole.
5 - Repeat process for the other Cradle.
Steps 1 – 4
Lifting
Straps
Dockside Rack
Notes - Lifting Straps are on the inside
Dockside Rack – Short Legs on the outside
Waterside Rack – Shorter Legs on the inside
Insert Clevis Pins and Circular Retaining Rings on Pivot Lateral:
6 – If the Water Level is 10 to 25 inches below your Dock Decking -
Insert Clevis Pin through Hole 2 in Pivot Lateral such that the head is between the Pivot Lateral and Cradle, attach
circular retaining ring through the hole in the end of the clevis pin.
7 – If the Water Level is 25 inches or greater from the Dock Decking –
Insert Clevis Pin through Hole 4 in Pivot Lateral such that the head is between the Pivot Lateral and Cradle, attach
circular retaining ring through the hole in the end of the clevis pin
Dockside Rack
Hole 4
Hole 2
Circular
Retaining
Ring
Assembly Instructions
Handle
Lifting
Pivot
Straps
Lateral
Cradle
Waterside Rack
Clevis Pin
Head
Snap Button
Cam Buckle
Hole 4
Hole 2
Clevis Pin
Head
Page 4 of 11
